Manual Parkside IAN 282494 PWSA 20 Li A1 (page 35 of 134) (English, German, Dutch, French, Portuguese, Spanish)

746159

Zoom out

Zoom in

1/134

PWSA 20-Li A1

■ 30 │ GB

│

RISK OF INJURY

► Make sure that the blade guard

is ﬁtted

at least at the same angle as the additional

handle (see ﬁg. B). Otherwise, you could

injure yourself on the roughing disc or cutting

disc.

♦ Open the clamping lever

♦ Place the blade guard with the coding pin

in the coding groove .

♦ Turn the blade guard to the required position

(working position). The closed side of the blade

guard must always be toward the operator.

♦ Close the clamping lever

to clamp the blade

guard into position. If necessary, the clamping

force of the lock can be changed by loosening

or tightening the adjusting nut . Ensure that

the blade guard sits ﬁrmly on the neck of the

spindle.

Fitting the additional handle

ATTENTION!

► For safety reasons, this appliance may only

be used with the additional handle

Failure to do this can lead to serious injury.

The additional handle can be screwed

onto the left or the right depending on the job

at hand.

Fitting/changing the roughing/

cutting disc

Always wear protective gloves when changing

cutting/rough grinding discs.

Pay attention to the dimensions of the roughing/

cutting disc. The diameter of the hole must ﬁt the

mounting ﬂange

without any play. Do not use

a reducer or adapter.

NOTE

► Use only discs which are free of dirt.

■ Use only grinding discs whose permissible

speed rating is at least as high as that on the

type plate on the power tool.

■ RISK OF INJURY! Press the spindle locking

button

only when the mounting spindle is

at a complete standstill.

♦ Press the spindle locking button

to lock the

motor.

♦ Undo the clamping nut

using the two-hole

mounting spanner (see ﬁg D).

♦ Place the rough grinding or cutting disc with

the label side towards the appliance on the

mounting ﬂange

♦ Then replace the clamping nut

with the

raised side facing up on the mounting spindle .

With thin grinding discs (see ﬁg. 1):

♦ The collar of the clamping nut

faces upwards

so that a thin grinding disc can be ﬁtted safely.

≤ 3,2 mm

Fig. 1

♦ Press the spindle locking button

to lock the

motor.

♦ Tighten the clamping nut

using the two-hole

mounting spanner .

With thick grinding discs (see ﬁg. 2):

> 3,2 mm

Fig. 2

The collar of the clamping nut

faces downwards

so that the grinding disc can be ﬁtted securely onto

the mounting spindle .

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 282494 PWSA 20 Li A1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 2,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 282494 PWSA 20 Li A1 Manual

Product: