746425
32
Zoom out
Zoom in
Previous page
1/130
Next page
PFBS 160 B2
GB
IE
 29
Using the grip ring with LED light
Hold down the spindle lock and screw the
tensioning nut
anticlockwise off the thread.
Release the spindle lock
.
Then screw the union nut
anticlockwise off
the thread.
Screw the grip ring with LED
clockwise onto
the screw thread.
Hold down the spindle lock
and screw the
tensioning nut clockwise onto the thread.
Release the spindle lock
.
Move the ON/OFF switch of the LED light
to the position "I" to switch it on (see fig. C).
Move the ON/OFF switch of the LED light
to the position "O" to switch it off again.
Proceed in reverse order to replace the union
nut
.
Notes on working with materials/
tools/speed range
Use the milling bits for working on wood, plas-
tics and plasterboard at maximum speed.
Determine the rotational speed range for work-
ing on zinc, zinc alloys, aluminium, copper and
lead by trying it out on test pieces.
Use a low rotational speed for work on plastics
and materials with a low melting point.
Use a high rotational speed for working on
wood.
Carry out cleaning, polishing and buffing work
in the medium speed range.
NOTE
The milling bit
is not suitable for steel or
iron. Suitable products are available in stores.
The following are recommendations only and not
binding. When carrying out practical work, carry
out your own tests to see which tool and which set-
tings are ideal for the material you are working on.
Set a suitable rotational speed:
Number on the speed
control
Material being
worked
1 Plastics and materials
with a low melting
point
2–3 Stone, ceramics
4 Soft wood, metal
5 Hardwood
Max. Steel
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 281406 PFBS 160 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 281406 PFBS 160 B2 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info