746415

Parkside IAN 281392 PSH 3 A2 Manual

19
Zoom out
Zoom in
Previous page
1/68
Next page
20 GB/IE
Error Cause Solution
The reaction is slow. The ambient temperature is too
low / high.
Only use the welding helmet in
temperatures between -5 °C and
+55 °C.
The sensitivity is too low. Set the sensitivity to a higher
setting.
The visibility is poor. The protector / the protective
screen is dirty.
Clean the protector and the pro-
tective screen.
The protective film on the protec-
tive screen was not removed.
Remove the protective film.
The ambient light is not sufficient. Apply more light to your work
surroundings.
The wrong darkening shade has
been set.
Reset the darkening shade.
The welding helmet slips.
The headband
5
has been put
on incorrectly.
Put on the headband
5
again
tighter.
Warranty and service
information
Creative Marketing Consulting GmbH
warranty
Dear customer, the warranty for this device is 3 years
from the date of purchase. In the event of product
defects, you have legal rights against the retailer of
this product. Your statutory rights are not limited in
any way by our warranty detailed below.
Warranty terms
The warranty period begins on the date of purchase.
Please keep the original receipt in a safe place.
This document is required as your proof of purchase.
Should this device show any fault in materials or
manufacture within 3 years from the date of pur-
chase, it will be repaired or replaced - at our choice
- by us free of charge. This warranty is conditional
on the defective device and the receipt of purchase
being presented within the 3 year warranty period,
and that there is a brief written description of the
nature of the defect and of the date it arose.
If the defect is covered by our warranty, you will
receive the product which has been repaired or a
new product. A repair or exchange of the device
does not begin a new warranty period.
Extent of warranty
The appliance has been manufactured to strict
quality guidelines and meticulously examined be-
fore delivery.
The warranty applies to defects in material or man-
ufacture. This warranty does not apply to product
parts subject to normal wear and tear and which
can therefore be considered as wear items, or to
damage to fragile parts, e.g. switches, storage bat-
teries or glass parts.
This warranty becomes void if the device has been
damaged or improperly used or maintained. All in-
structions provided in the instructions for use must be
followed strictly to constitute proper use of the prod-
uct. Purposes and practices which the operating in-
structions warn of or advise against must be avoided
without fail.
Warranty terms / Service / Label meaningsTroubleshooting / Warranty and service information / Warranty terms
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 281392 PSH 3 A2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 281392 PSH 3 A2 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info