Manual Parkside IAN 280250 PWS 125 D3 (page 10 of 114) (English, German, Dutch, Danish, French)

746143

Zoom out

Zoom in

1/114

1 0

GB IE NI

If you have checked the attach-

ment tool and attached it, keep

yourself and any nearby persons

beyond the level of the rotating

attachment tool and allow the de-

vice to run for 1 min. at the high-

est rotational speed. Damaged tools

usually break during this test period.

• Wear personal safety equip-

ment. Depending on the appli-

cation, use full face shields, eye

protection or safety goggles. In

so far as it is appropriate, wear

dust masks, ear protection,

gloves or special aprons which

keep small grinding and materi-

al particles away from you. Eyes

should be protected from the foreign

matter which can be caused to y du-

ring the various applications. Dust or

breathing masks should lter the dust

that is created during operation. If you

are exposed to loud noise for a long

time, you may suffer hearing loss.

• Ensure that other people are at

a safe distance to your working

area. Anyone who enters the wor-

king area should wear personal

protective equipment. Broken bits from

the piece being worked or broken attach-

ment tools can y away and cause injuries

even beyond the direct working area.

• Hold the electric tool only by the

insulated gripping surfaces when

performing work in which the

cutting tool may come into contact

with hidden wiring or its own

cord. Contact with a live wire can also

cause a charge in metal parts of the

device and result in an electric shock.

• Keep the cord away from the ro-

tating attachment tool. If you lose

control of the device, the power cord

can become separated or caught and

your hand or arm may be pulled into

the rotating attachment tool.

• Never put the electric tool down

before the attachment tool has

come to a full stop. The rotating at-

tachment tool can come into contact with

the surface upon which it is set, whereby

you could lose control of the electric tool.

• Never allow the electric tool to

run while you are carrying it.

Your clothing may accidentally come

into contact with the rotating attachment

tool and get caught and the attachment

tool could drill into your body.

• Clean the ventilation slots of

your electric tool routinely. The

motor air pulls dust into the housing

and, should too much metallic dust coll-

ect, could cause electrical hazards.

• Never use the electric tool near

ammable material. Sparks could

ignite this material.

• Do not use attachment tools

which require liquid coolant.

Using water or another liquid coolant

could lead to electrical shock.

Additional safety instructions

• Connect the appliance only to a power

socket with a residual current circuit

breaker of rated residual current no

more than 30 mA.

• Keep power cords and extension cords

away from the disc. If they are damaged

or cut through, immediately pull the plug

from the outlet. Do not touch the cable

before it has been disconnected from the

power supply. Risk of electric shock!

• If the replacement of the supply cord is

necessary, this has to be done by the

manufacturer or his agent in order to

avoid a safety hazard.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 280250 PWS 125 D3 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 280250 PWS 125 D3 Manual

Product: