Manual Parkside IAN 280250 PWS 125 D3 (page 9 of 114) (English, German, Dutch, Danish, French)

746143

Zoom out

Zoom in

1/114

NIIEGB

of moving parts, breakage of

parts and any other condition

that may affect the power tool’s

operation. If damaged, have the

power tool repaired before use.

Many accidents are caused by poorly

maintained power tools.

• Keep cutting tools sharp and

clean. Properly maintained cutting

tools with sharp cutting edges are less

Iikely to bind and are easier to control.

• Use the power tool, accessories

and tool bits etc. in accordance

with these instructions, taking

into account the working con-

ditions and the work to be per-

formed. Use of the power tool for

operations different from those intended

could result in a hazardous situation.

Service:

• Have your power tool serviced

by a qualied repair person

using only identical replacement

parts. This will ensure that the safety

of the power tool is maintained.

Safety instructions for all

applications

Common safety instructions for

grinding, sanding, working with

wire brushes polishing and cutting

grinders:

• This electric tool is to be used as

a grinder, sander, wire brush,

polisher and cutting grinder.

Follow all safety instructions,

directives, illustrations and facts

which you receive with the de-

vice. If you do not follow these instruc-

tions, an electrical shock, re and/or

serious injury may occur.

• Do not use any accessories that

are not specically intended and

recommended for this electric

tool by the manufacturer. Simply

because an accessory can be attached

to your electric tool does not guarantee

safe operation.

• The allowable rotation speed

of the attachment tools must be

at least as high as the highest

rotation speed indicated on the

electric tool. Accessories that run fas-

ter than the allowable speed can break

and y apart.

• The outside diameter and thick-

ness of the attachment tool must

correspond to the dimensions

indicated for your electric tool.

Attachment tools which are wrongly

dimensioned cannot be sufciently

shielded or controlled.

• Attachment tools with threaded

attachment must t the threa-

ding of the grinding spindle

exactly. For attachment tools

which are mounted through a

ange, the diameter of the hole

in the attachment tool must t

the mounting diameter of the

ange. Attachment tools which cannot

be precisely attached to the electric tool

turn unevenly, vibrate very strongly and

can ultimately lead to a loss of control.

• Never use damaged attachment

tools. Check attachment tools

such as grinding discs for chip-

ping or cracks, grinding plates

for cracks, wear or strong abra-

sion and wire brushes for loose

or broken wires before using

them. If the electric tool or the

attachment tool falls off, check

whether it is damaged or, use

an undamaged attachment tool.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 280250 PWS 125 D3 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 280250 PWS 125 D3 Manual

Product: