Manual Parkside IAN 276419 PTBM 500 C3 (page 9 of 96) (English, German, Dutch, Danish, French)

746153

Zoom out

Zoom in

1/96

tion and collection devices, make sure that

these are connected and properly used.

• Do not use the cable for purpo-

ses for which it is not intended.

Do not use the cable to pull the plug

from the socket. Protect the cable from

heat, oil and sharp edges.

• Secure the workpiece. Use jigs or

a vice to hold the workpiece securely.

This is safer than using your hand.

• Avoid abnormal body postures.

Ensure secure footing and keep your

balance at all times.

• Maintain tools with care

- Keep cutting tools sharp and clean

for better and safer working.

- Follow the instructions for lubrica-

tion and changing tools.

- Regularly check the connection

cable of the power tool and, if it is

damaged, have it replaced by a

qualied specialist.

Check extension cords periodically

and

replace them if they are damaged.

- Keep handles dry, clean and free

from oil and grease.

• Remove the plug from the mains

socket when the power tool is not in use,

before maintenance and when changing

tools such as saw blades, drill bits, cutters.

• Do not allow any tool keys to

remain inserted. Check, before swit-

ching on, that keys and adjusting tools

have been removed.

• Avoid unintentional starting. Make

sure that the switch is off when inserting

the plug into the socket.

• Use extension cables outdoors.

Only use approved and appropriately

marked extension cables outdoors.

• Pay attention at all times. Pay atten-

tion to what you are doing. Work using

common sense. Do not use the power tool

if you cannot concentrate.

• Check the power tool for possible

damage

- Before further use of the power tool,

safety devices or slightly damaged

parts must be carefully examined in

respect of their proper and intended

function.

- Check that the moving parts are

working properly and are not jam-

med or whether parts are damaged.

All parts must be correctly tted and

satisfy all conditions to ensure the

proper operation of the power tool.

- Damaged safety equipment and

parts must be repaired properly or

replaced by an authorised specialist

workshop unless otherwise indica-

ted in the instructions.

- Damaged switches must be repla-

ced at a customer service work-

shop.

- Do not use power tools if the switch

cannot be turned on and off.

• CAUTION! The use of other bits and

other accessories can result in a risk of

personal injury.

• Have your power tool be repaired

byaqualiedelectrician

- This power tool complies with the relevant

safety regulations. Repairs may only be

performed by a qualied electrician,

using original spare parts; otherwise acci-

dents involving the user may result.

Service:

• Have your power tool repaired

onlybyqualiedspecialistsand

only with original spare parts. This

will ensure that the power tool remains

safe.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 276419 PTBM 500 C3 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 2,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 276419 PTBM 500 C3 Manual

Product: