745542
13
Zoom out
Zoom in
Previous page
1/60
Next page
PDWS 125 A1
10 
GB
IE
Attaching the grinding disc
CAUTION!
Disconnect the compressed air tool from
the compressed air supply before replacing
the accessory tool or accessories, or before
carrying out adjustments or servicing. The
spindle
must be at a standstill.
Lock the spindle
Place the rear clamping flange
on the spindle
. This is correctly attached if the spindle
cannot be rotated.
Place the open-ended spanner
supplied
over the collar of the rear clamping flange to
prevent it from turning.
Attaching the grinding disc
Place the grinding disc
on the rear clamping
flange .
The grinding disc must be evenly placed on
the rear clamping flange .
Fixing/loosening the front flange
The 2 sides of the front flange
are different.
Screw the front flange onto the spindle as
follows:
For thin grinding discs (see figure 1):
The collar on the front flange
faces upwards
so that the thin grinding disc can be safely
clamped.
12
≤ 3,2 mm
fig. 1
For thick grinding discs (see figure 2):
> 3,2 mm
fig. 2
The collar on the front flange
faces downwards
so that the front flange can be safely attached
to the spindle .
Locking the spindle
.
Tighten the front flange
in a clockwise direc-
tion using the two-hole spanner .
Loosening the front flange:
Lock the spindle
.
Undo the front flange
in an anticlockwise
direction using the two-hole spanner .
Fitting the connector nipple
Remove the plastic protective cap from the
appliance‘s air inlet.
Wrap the threads on the connector nipple
with the teflon tape supplied.
Screw the connector nipple
into the air inlet.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 276009 PDWS 125 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 276009 PDWS 125 A1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info