Manual Parkside IAN 276009 PDWS 125 A1 (page 8 of 60) (English, German, Dutch, French)

745542

Zoom out

Zoom in

1/60

PDWS 125 A1

│

5 ■

■ Grinding discs and abrasive cutting discs may

not be used for side grinding (exception: grind-

ing discs for side grinding). Grinding machines

for abrasive media may only be operated at a

rotation speed which is less than the abrasive

media maximum speed;

■ ensure that no persons are standing in the im-

mediate vicinity.

■ Personal safety equipment such as suitable

gloves, aprons and protective helmets must be

worn.

■ Sparks caused by grinding can ignite clothing

and cause serious burns. You must ensure that

sparks do not impact clothing. Wear ﬁre-retard-

ant clothing and ensure that there is a bucket of

water in the vicinity.

Risks due to repetitive movements

■ When using a grinding machine for abrasive

media to perform work-related activities, opera-

tors may experience uncomfortable sensations

in their hands and arms, as well as in the neck

and shoulders or other parts of the body.

■ When using a grinding machine for abrasive

media, the operator should adopt a comfort-

able posture whilst ensuring a secure hold

and avoiding awkward postures or positions

in which it is diﬃcult to maintain balance. The

operator should change positions during the

course of long-lasting tasks. This can be helpful

in the prevention of discomfort and fatigue.

■ If the operator notices symptoms such as persis-

tent or recurring illness, discomfort, throbbing,

pain, tingling, burning or stiﬀness, these indica-

tions should not be ignored. In this case, the

operator should inform his/her employer and

consult a suitably qualiﬁed physician.

Hazards caused by accessories

■ Disconnect the grinding machine for abrasive

media from the power supply before ﬁtting or

replacing the machine tools or accessories.

■ Use only accessories and supplies of the sizes

and types recommended by the manufacturer

of the grinding machine for abrasive media.

Never use any other types or sizes of accessory

parts and consumables.

■ Ensure that the dimensions of the abrasive me-

dia are compatible with those of the grinding

machine for abrasive media and that the abra-

sive media ﬁts onto the spindle.

■ Ensure that the thread type and size of the

abrasive media exactly matches the thread type

and size of the spindle thread.

■ Always inspect the abrasive media before use.

Do not use any abrasive media which may

have been dropped or which shows signs of

splintering, cracking or other ﬂaws.

■ Always ensure that the abrasive media has

been properly ﬁxed and tightened ﬁrmly

enough before use; the grinding machine for

abrasive media must be operated at idling

speed for at least 1 minute in a safe location;

switch oﬀ the machine immediately if you notice

excessive vibration or any other damage; the

cause of these malfunctions must be determined.

■ Ensure that the spindle end does not contact the

bottom of the openings in cut wheels, grinding

cones or whetstones with thread inserts which

are intended for the attachment of machine

spindles, by checking the dimensions and other

important spindle data.

■ In the case of abrasive media which are sup-

plied with reducers or reducing bushings, or

which are intended for use with reducers or

reducing bushings, the operator must ensure

that the reducer or reducing bushing does not

contact the face of the clamping ﬂange and that

the clamping force provides suﬃcient rotational

drive to prevent slipping of the abrasive media.

■ In cases in which clamping ﬂanges for diﬀerent

types and sizes of abrasive media have been

provided, always ﬁt the correct clamping ﬂange

for the abrasive media being used.

■ Avoid direct contact before and after use of the

machine tool since it can be hot or have sharp

edges.

■ The abrasive media must be handled and stored

in accordance with the manufacturer's instruc-

tions.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 276009 PDWS 125 A1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 276009 PDWS 125 A1 Manual

Product: