Manual Parkside IAN 276009 PDWS 125 A1 (page 7 of 60) (English, German, Dutch, French)

745542

Zoom out

Zoom in

1/60

PDWS 125 A1

■ 4

│

Hazards caused by ﬂying parts

■ If a workpiece or accessory or even part of the

machine tool itself breaks, parts can be ﬂung

out at high speeds.

■ Always wear shock-resistant eye protection when

operating the grinding machine for abrasive

media. The degree of necessary protection must

be evaluated separately for each individual

task.

■ You must ensure that the workpiece has been

securely ﬁxed.

■ You must ensure that the abrasive media has

been safely attached to the grinding machine

for abrasive media.

■ You must ensure that the maximum operating

rotational speed of the abrasive media calcu-

lated in revolutions per minute is the same as

or higher than the rated spindle speed.

■ Ensure that the protective guard has been ﬁtted,

that it is in good condition and properly ﬁxed,

and that it is regularly checked.

■ It is possible that no protective guard is required

during internal grinding under the condition that

the workpiece encloses the abrasive media.

■ You must ensure that the clamping ﬂange is be-

ing used in accordance with the manufacturer's

instructions and that it is in good condition, i.e.

without cracks and ﬂaws, and that it is ﬂat.

■ You must check to see whether the spindle and

spindle thread have become damaged or worn.

■ You must ensure that any sparks or ashes

produced during operation do not cause any

hazards.

■ Always disconnect the grinding machine from

the power supply before replacing the abrasive

media or servicing it.

Hazards caused by entanglement

■ Suﬀocation, scalping and/or cut wounds can

occur if loose clothing, jewellery, necklaces, hair

or gloves are not kept away from the machine

and its accessories.

Hazards during operation

■ Avoid contact with the rotating spindle and the

ﬁtted grinding disc in order to avoid cuts to the

hands and other body parts.

■ When using the machine, the operator's hands

can be subject to hazards such as cuts, grazing

and heat. Wear suitable gloves to protect your

hands.

■ The operator and maintenance personnel must

be physically capable of handling the size, mass

and power of the machine.

■ Hold the machine correctly:

Be ready to counteract any normal or suddenly

occurring movements. Keep both hands ready

for use.

■ Ensure that your body is balanced and that you

have a secure standing position.

■ Release the start/stop control if there is a disrup-

tion to the power supply.

■ Use only the recommended lubricants.

■ Safety goggles must be worn; wearing of protec-

tive gloves and safety clothing is recommended.

■ Wear a safety helmet if working above head

height.

■ Do not put the machine down after switching

oﬀ until the disc has stopped rotating.

■ When abrasive cutting, the workpiece must be

supported so that the cutting slot has a constant

or increasing width during the entire cutting

process.

■ If the abrasive media jams in the cutting slot, the

grinding machine for abrasive media must be

turned oﬀ and the grinding disc must be loos-

ened. Before continuing operation, check that

the abrasive media is still properly ﬁxed and

has not been damaged.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 276009 PDWS 125 A1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 276009 PDWS 125 A1 Manual

Product: