Manual Parkside IAN 275685 PDBS 2200 A2 (page 11 of 62) (English, German, Dutch, Danish, French)

745550

Zoom out

Zoom in

1/62

12 GB/IE

Commissioning / After initial use / Maintenance

Adjusting the compressed air

Note: this device is designed for an operating

pressure of up to 6.8 bar and a compressor with

the minimum air ﬂow speciﬁed in the technical spe-

ciﬁcations. When setting the air pressure, remem-

ber the pressure drops by approx. 0.6 bar with a

hose length of 10 m and an inner diameter of

9 mm.

Only use ﬁltered, lubricated and regulated

compressed air.

Initial use

Activate the On / Oﬀ switch

to start using

the device.

Release the On/ Oﬀ switch

to switch the

device oﬀ.

Changing rotation

ATTENTION! The device must come to a

complete standstill before changing the direc-

tion of rotation.

ATTENTION! A machine rotating in an unex-

pected direction can be dangerous. Always

pay attention and use care.

Note: The power drill is designed for clock-

wise/counter-clockwise rotation. Use the

forward/reverse switch

to change the

direction of rotation of the power drill.

Set the forward/reverse switch

to position F

to switch to clockwise rotation.

Set the forward/reverse switch

to position R

to switch to counter-clockwise mode.

After initial use

Once the task has been ﬁnished the device must be

disconnect from the compressed air supply

Brieﬂy activate the On / Oﬀ switch

on the

device to bleed any residual compressed air.

Now pull back the safety on the connection

coupling of your compressed air hose.

Now remove the hose from the plug nipple

Careful when putting the device

down. Always put down the device so it does

not rest on the trigger. This could potentially re-

sult in inadvertent activation of the tool, which

in turn could result in hazards.

Maintenance

ATTENTION! All maintenance must be per-

formed by trained individuals. Follow the speciﬁed

maintenance instructions to ensure a long life and

proper operation of this quality product.

Disconnect equipment from the compressed air

source when performing maintenance and care.

Check the condition of wear and tear items

and accessories with each maintenance.

Note: Daily cleaning and regular lubrication

are an absolute necessity for smooth operation.

Only use special tool oil with a high viscosity

(thin ﬂuid). Oil for compressed air tools or

SAE10-20 motor oil are suitable.

ATTENTION! Do not use other (especially

high viscosity) lubricants. Malfunctions or per-

manent damage may otherwise occur.

The following lubricating options are

available:

a) via oil-mist generator

To use the oil-mist generator plug the plug

nipple

directly into the equipment and con-

nect with your air hose.

b) by hand

Alternatively you can also manually lubricate

your equipment (not recommended).

To do so, remove the screw plug on the oil ﬁller

port.

Apply 3–5 drops of oil to the compressed air

connection before using the compressed air

tool

If the air tool has not been used for several

days 5–10 drops of oil must be added to the

air connection

... / Cleaning and Care / Information about warranty and service processing

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 275685 PDBS 2200 A2 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 275685 PDBS 2200 A2 Manual

Product: