Manual Parkside IAN 275685 PDBS 2200 A2 (page 10 of 62) (English, German, Dutch, Danish, French)

745550

Zoom out

Zoom in

1/62

11 GB/IE

Safety information for air tools Safety information for air tools / Commissioning

If you notice your skin on ﬁngers or hands beco-

ming numb, tingling, hurting or becoming white,

stop working with the machine and consult a

physician.

Operate and maintain the drill as recommen-

ded in this manual to prevent an unnecessary

increase in vibration.

Do not allow the drill to rattle on the material,

as this will most likely signiﬁcantly increase vi-

bration.

Do not use work or poorly ﬁtting sockets or ex-

tensions, as these are very likely to signiﬁcantly

increase vibration.

Select, maintain and replace consumables and

machine tools as recommended in these in-

structions to prevent an unnecessary increase

in vibration.

Whenever possible, use a stand, clamp or an

equaliser to support the weight of the machine.

Do not grip the machine too tightly but ﬁrmly,

maintaining the necessary hand reaction forces,

as the vibration hazard typically increases when

tightening the grip.

Additional safety instructions

for pneumatic machinery

Compressed air can result in serious injuries.

- Always close the air supply, release pressure

from the hose, and disconnect the machine

from the compressed air supply when the ma-

chine is not in use, before switching accesso-

ries or when performing repairs.

- Never aim the air ﬂow at yourself or others.

Hoses ﬂapping about can result in serious inju-

ries. Therefore always inspect hoses and their

fasteners for damage and a secure ﬁt.

Direct cold air away from hands.

If using universal swivel couplings (coupling

discs) always use locking pins and use whip-

check hose safety cables for protection in the

event the connection between the hose and the

machine or in between hoses fail.

Be sure not to exceed the maximum pressure

speciﬁed on the machine.

Never carry pneumatic tools by the hose.

Commissioning

Note: The device is fully functional as delivered.

Inserting the bit or drill

Loosen the keyed chuck

using the wrench

(see Fig. A).

Now insert the bit extension

as far as possi-

ble into the keyed chuck

and attach the

bit

(see Fig. A).

To secure the bit extension

, tighten the

keyed chuck

using the wrench

(see Fig. B).

Ensure the bit extension

and the bit

are

seated securely. Insert the drill as in these steps

(see Fig. A and C).

Connecting

Note: only use connection hoses with a minimum

inside diameter of 9 mm.

Wrap the coupler

with Teﬂon tape (not in-

cluded) before screwing it into the compressed

air unit. Wrap the tape around the thread as

tight as possible. This will minimise the likeli-

hood of air leaking and optimise the work

process.

Screw the plug nipple

into the connection

thread of the power drill (see Fig. D).

Tighten the connection using a pair of pliers.

Now attach the air hose to the plug nipple

using some force until the hose locks into

place.

ATTENTION! Ensure that the com-

pressed air hose is ﬁrmly seated. A

loose hose whipping about out of

control presents a major hazard. Also ensure

the two screw connections between the coup-

ling and device are secure.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 275685 PDBS 2200 A2 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 275685 PDBS 2200 A2 Manual

Product: