Manual Parkside IAN 275683 PDNE 4000 A1 (page 16 of 34) (English, German, Dutch)

745543

Zoom out

Zoom in

1/34

17 GB/IE

Introduction Introduction / Safety notices

the work location. Noise development at the work

location depends e.g. on the work environment, the

work piece, the work piece support and the number

of fastener driving processes.

In accordance with conditions at the work location,

individual noise reduction measures may need to

be carried out, such as placing the work piece on

a noise-suppressing surface, clamping or covering

to prevent work piece vibration and adjusting to the

minimum pressure required by the work process. In

certain cases, wearing personal hearing protection

is require.

Wear hearing protection!

Total vibration values in accordance with

ISO 28927-10, EN 12096:

Vibration emission value a

= 69.83 m / s

Uncertainty K = 1.5 m / s

Scope of delivery

1 Needle scaler (head preinstalled)

1 Threaded plug nipple

1 Allen key

1 Instructions for use

Safety notices

General safety rules

To connect the device to the air hose, never

point the front end (needle head) of the tool at

yourself or others.

Never point the tool at yourself or others.

In the cases of multiple hazards the safety in-

structions must be read and understood before

attaching, operating, repairing and exchanging

accessories and before working near the

non-rotating, percussive machine. Otherwise

severe bodily injuries may result.

The non-rotating, percussive machine should

only be set up, adjusted and used by qualiﬁed

and trained users.

Never modify the non-rotating, percussive

machine. Modiﬁcations may reduce the eﬀec-

tiveness of safety measures and increase oper-

ator risks.

Do not lose the safety instructions – hand them

to the operator.

Never use a damaged non-rotating, percussive

machine.

Regularly maintain machines to verify all re-

quired rated values and markings required by

ISO 11148 are legible on the machine. If nec-

essary, the employee/user must contact the man-

ufacturer for replacement labels for markings.

Risks due to projected parts

Disconnect the non-rotating, percussive ma-

chine from the power supply before replacing

the inserted tool or accessories.

If the work piece, one of the accessories, or the

tool itself breaks, parts may be projected at a

great speed.

Always wear eye protection when operating

the non-rotating, percussive machine. The level

of required protection required should be as-

sessed individually for each application.

When working overhead, a safety helmet must

be worn.

In this case, the risk to other people must also

be assessed.

It must be ensured that the work-piece is prop-

erly secured.

Only operate the machine with the machine tool

secured in the machine with a suitable retainer.

To prevent injuries, any worn, broken or bent

parts of the retainer must be replaced.

Before switching on the machine, the machine

tool must be ﬁrmly applied to the surface you

will be working on.

Operating hazards

During uses, the operator‘s hands may be ex-

posed to hazards such as impact, cuts, abrasion

and heat. Wear suitable gloves to protect hands.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 275683 PDNE 4000 A1 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 275683 PDNE 4000 A1

Parkside IAN 275683 PDNE 4000 A1 User Manual - French - 33 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 275683 PDNE 4000 A1 Manual

Product: