745543

Parkside IAN 275683 PDNE 4000 A1 Manual

15
Zoom out
Zoom in
Previous page
1/34
Next page
16 GB/IE
Introduction
Pneumatic needle scaler
PDNE 4000 A1
Introduction
Congratulations!
You have chosen high-quality device
by our company. Familiarise yourself
with the product before using it for the first time. In
addition, please carefully refer to the operating instruc-
tions and the safety advice below. Initial operation of
this tool must be performed by trained personnel.
KEEP OUT OF THE REACH OF CHILDREN!
Intended use
The needle scaler is solely for removing rust and
coatings (paint, lacquer, etc.) from solid metal parts,
and for shaping jobs. Only use the product as de-
scribed and for the indicated purpose. Keep these
instructions in a safe place. When passing this prod-
uct on to others, please also include all the document
s.
Any use other than the intended is prohibited and
potentially dangerous. Damages resulting from
noncompliance or misuse are not covered by the
warranty and are not included in the manufacturer‘s
l
iability. This device has been designed for househol
d
use and may not be used for commercial or indus-
trial purposes.
Features
Check that all the items are present and
that the device is in perfect condition im-
mediately after unpacking. Do not use
the
device if it is defective.
1
Needles
2
Needle guide
3
Handle
4
Air adjusting screw
5
¼ Compressed air connection
6
Trigger
Technical Data
Operating pressure: 6.3 bar
Compressed air connection: ¼
(0.63 cm)
Percussion rate: 4000 rpm
Sound pressure level: 100.2 dB(A)
(EN ISO 15744)
Weight: 1900 g
Noise- and vibration information:
Measured values determined in accordance with
ISO 15744.
Noise level L
pA
: 100.2 dB(A)
Sound power level L
WA
: 111.2 dB(A)
L
pC, peak
= 117.4 dB(A)
Uncertainty K
= 3 dB
These values are characteristic values referenced to
the device and do not reflect noise development at
The following pictograms are used in these instructions for use / on the equipment:
Please read the operating instructions!
Observe the warning and safety
instructions!
Note
Wear ear protection, dust mask, sa-
fety glasses and protective gloves.
Oil daily
Dispose of packaging and device in
an environmentally-friendly way!
Introduction / Safety notices
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 275683 PDNE 4000 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 275683 PDNE 4000 A1 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 275683 PDNE 4000 A1

Parkside IAN 275683 PDNE 4000 A1 User Manual - French - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info