745470
11
Zoom out
Zoom in
Previous page
1/45
Next page
GB
IE
NI
 7
PBF 400 A1
Dust extraction system with dust bag
(see fig. D):
Press the handles of the wire ring on the dust
bag
together so that it opens up.
Now press the dust bag
onto the adapter
fitting .
Dismantling/removing the dust bag:
Press the handles of the wire ring on the dust
bag
together so that it opens up. Pull the
dust bag off the appliance.
Connect the adapter for external dust extrac-
tion systems:
Push the extraction adapter
onto the
bandfile so that its teeth slot into the notches
provided. Now screw the extraction adapter
tight in a clockwise direction.
Push the hose from a suitable dust extraction
appliance (e.g. a workshop vacuum cleaner)
onto the extraction adapter
.
Removal:
Pull off the hose of the dust extraction device.
Turn the extraction adapter
anticlockwise
and take it off the bandfile.
Operation
Switching on and off
When operating the bandfile, you can choose
between instantaneous and continuous operation.
Switching to instantaneous operation:
Press the ON/OFF switch
.
Switching off instantaneous operation:
Release the ON/OFF switch
.
Switching to continuous operation:
Press the ON/OFF switch
, keep it pressed i
n and then press the lock button .
Switching off continuous operation:
Press the ON / OFF switch
and then release
it.
Selecting speed and abrasive belt
You can use the speed control to select the rota-
tional speed. The optimum belt speed is dependent
on the material being processed. We recommend
carrying out a practice run to determine the correct
speed.
Tips and tricks
Never use the same abrasive belt to process
wood and metal.
Worn or cracked abrasive belts can damage
the workpiece. Therefore, be sure to replace
worn abrasive belts before starting work.
Always hang up the abrasive belts to store
them, as kinks etc. can make them unusable.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 275350 PBF 400 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 275350 PBF 400 A1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info