745470
10
Zoom out
Zoom in
Previous page
1/45
Next page
6 
GB
IE
NI
PBF 400 A1
Tensioning/replacing the abrasive
belt
WARNING! RISK OF INJURY
Always remove the power plug from the wall
socket before carrying out any work on the
bandfile.
Loosen the clamping device for the abrasive
belt by pushing the clamping lever forwards
(see fig. B). The abrasive belt can now be
removed.
Push the new abrasive belt
through the slot
in the appliance housing. Important: The direc-
tion of the arrows on the inside of the abrasive
belt and on the device housing must match.
Guide the abrasive belt
over the rear and
front rollers .
Press the clamping lever
back into its initial
position.
Manually adjusting the abrasive belt:
If the belt tracking is not centred when you switch
on the appliance, you may need to manually
adjust it.
To do this, turn the adjusting screw
, until the
abrasive belt is running centred. Important:
It is important to ensure that the abrasive belt
is not rubbing against the housing. Check the
belt tracking regularly and adjust it if required
with the adjusting screw (see fig. C).
Dust extraction
WARNING! RISK OF EXPLOSION!
If there is an explosive dust/air mixture, you
must use a specially-designed extraction
device.
RISK OF FIRE DUE TO FLYING SPARKS!
Do not use dust extraction systems (dust bags
or vacuum cleaners) when grinding metals.
WARNING! RISK OF FIRE!
There is a risk of fire when working with elec-
trical appliances that are fitted with a dust
bag or which can be connected to a vacuum
cleaner via a vacuum cleaner adapter. In un-
favourable conditions, e.g. when sparks are
flying while grinding metal or metal residues
in wood, wood dust in the dust bag (or in the
vacuum cleaner dust bag) can spontaneously
ignite. This is a particular risk if the wood
dust is mixed with paint residues or other
chemicals and the workpiece has become hot
after being worked for a long time. Therefore,
do not allow the workpiece or appliance to
overheat, and always empty the dust collec-
tor or the dust bag in the vacuum cleaner
before taking a break from work.
Wear a dust mask!
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 275350 PBF 400 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 275350 PBF 400 A1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info