Manual Parkside IAN 273459 PLBS 30 B2 (page 54 of 59) (English, German, Dutch, French)

745553

Zoom out

Zoom in

1/59

Additional information on soldering

Solder and flux

Solder for the DIY market is almost exclusively produced in the form of wire.

There are two types of solder wire on the market:

1. Simple, unfilled solder wire - additional use of a suitable flux is required.

2. Solder wire with flux core.

Wood burning pen

• Firstly, make a sketch of the desired pattern on your workpiece with a pencil or

alternatively apply a ready-made template to the workpiece.

• Types of wood with smooth surfaces are particularly suitable for burning.

• When burning wood with a rough surface, be aware that it can be difficult to guide the tip

along the line required. In this case the surface should be sanded first.

• A wide variety of patterns can be created with the marking tips supplied.

• A sooty deposit can build up on the tip or the stamp during use. Use fine sandpaper to

remove the deposits and to keep the tips clean. A clean tip is essential for precise and

accurate work.

• If the soldering iron set is not to be used keep it at a safe, cool, dry and well-ventilated

place out of the reach of children.

• Allow the appliance to cool down completely before storage.

Storage conditions

occasionally with the cleaning sponge (2) and re-tin the tip if necessary. Use a de-

soldering braid (not supplied) to clean the joint, to de-solder and to remove excess

solder from the joint. Cover the excess solder with the de-soldering braid and heat up the

soldering tip (9). The melted solder is soaked up by the de-soldering braid.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 273459 PLBS 30 B2 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 273459 PLBS 30 B2 Manual

Product: