745553

Parkside IAN 273459 PLBS 30 B2 Manual

53
Zoom out
Zoom in
Previous page
1/59
Next page
55
de
CAUTION DANGER OF BURNS!
The soldering iron, the soldering tip and the
soldering iron holder remain hot for some time after
disconnection from the mains!
Switching on and off
• Connect the soldering iron to the mains to switch it on and to heat it up.
• Disconnect the soldering iron from the mains to switch it off and to cool it down.
4. Using the device
Working with the device (fig. D / E)
• Connect the mains cable (6) with a suitable mains supply and place the soldering iron
with the tip in the tool holder (15). Allow the soldering iron to heat up. This can take
approximately 3 to 5 minutes depending on the required working temperature.
• The correct working temperature is reached when the solder begins to melt as soon as it
comes into contact with the soldering tip.
• Before soldering the soldering tip must be tinned. Heat up the new soldering tip (or first
clean an existing tip with the soldering sponge) and coat it by applying solder wire to the
tip.
• Before starting work on the a particular workpiece and/or type of material, check for
suitability by testing the soldering iron on a similar piece of (scrap) material.
• Clean the parts you wish to join before starting to solder.
• Touch the edge of the flux-cored solder wire on to the very end of the soldering tip (6) to
melt the solder wire. The workpiece is coated with the flux, which flows out of the solder
wire, allowing the solder to join the metal.
• If the soldering iron is used for longer periods we recommend that you clean the tip
Accessory compartment
• The soldering stand is fitted with a useful accessory compartment for storage of spare
soldering tips etc.
… 53 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 273459 PLBS 30 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 273459 PLBS 30 B2 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info