Manual Parkside IAN 273278 PTS 500 A1 (page 10 of 74) (English, German, Dutch, Danish, French)

745341

Zoom out

Zoom in

1/74

PTS 500 A1

Checking the blade guard:

■ Pull the release lever for the blade guard as

far as it will go. The blade guard should move

without jamming. When letting go of the release

lever for the blade guard, it should automatic-

ally jump back to its original position.

Circular saw blades (symbols)

Wear protective gloves!

Wear a dust mask!

Wear protective glasses!

Wear ear protectors!

Safety instructions for abrasive

cutting appliances

a) The blade guard, which is a part of the power

tool, must be attached securely and set in a

way that ensures maximum safety, i.e. the

smallest possible amount of the grinding tool

is exposed to the operator. Ensure that you

and anyone else in the vicinity remain outside

of the range of the rotating grinding disc. The

blade guard is designed to protect the operator

from fragments and accidental contact with the

grinding tool.

b) Use only diamond-coated cutting discs for

your power tool. Just because you can attach

the accessories to your power tool, does not

ensure they are safe to use.

c) The permissible speed of the accessory tool

used must be at least as high as the maximum

speed speciﬁed for the power tool. Accessor-

ies that rotate faster than the permissible rate

can break and throw pieces into the air.

d) Grinding tools should only be used for the

recommended applications.

For example: Never grind with the side surface

of a cutting disc. Cutting discs are designed to

remove material with the edge of the disc. Any

lateral application of force on these grinding

tools can lead to breakage.

e) Always use an undamaged clamping ﬂange

of the correct size and shape for the selected

grinding disc. Suitable ﬂanges support the

grinding disc and reduce the risk of disc break-

age.

f) Do not use worn grinding discs from larger

power tools. Grinding discs for larger power

tools are not designed for the higher rotational

speeds of smaller power tools and can break.

g) The external diameter and thickness of the

accessory tool used must comply with the

dimensions of your power tool. Incorrectly

dimensioned accessory tools cannot be suﬃ-

ciently shielded or controlled.

h) Grinding discs and ﬂanges must ﬁt precisely

onto the grinding spindle of your power tool.

Accessory tools which do not precisely ﬁt on

the grinding spindle of the power tool will rotate

unevenly, vibrate severely and can lead to a

loss of control.

i) Do not use damaged grinding discs. Check

the grinding discs before each use for chips

and cracks. If the power tool or grinding disc

is dropped, check to see if it is damaged,

or use an undamaged grinding disc. After

checking and inserting the grinding disc,

ensure that you and any other people in the

vicinity remain outside of the range of the

rotating grinding disc, and allow the tool to

rotate at maximum speed for one minute.

Damaged grinding discs usually break during

this test period.

j) Wear personal protective equipment.

Depending on the application, ensure that

you use full face protection, eye protection

or goggles. If required, use a dust mask, ear

protectors, protective gloves or special apron

to protect you from grindings and material

particles. Eyes should be protected from ﬂying

debris that may be generated during certain

applications. Dust or ﬁlter masks must ﬁlter

any dust created by the application. If you are

exposed to loud noise for any length of time,

you may suﬀer hearing loss.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 273278 PTS 500 A1 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 0,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 273278 PTS 500 A1 Manual

Product: