745335
12
Zoom out
Zoom in
Previous page
1/102
Next page
12
GB
IE
Cleaning and
Maintenance
Pull out the power plug before eve-
ry maintenance operation. This also
includes connecting to the water
supply or trying to eliminate leaks.
There is a risk of electrocution or of
injury from moving parts.
Cleaning
Never direct the water jet
against the pressure cleaner,
nor clean the pressure clean-
er under owing water. This
could give rise to the danger
of electric shock and damage
the pressure cleaner!
Always keep the pressure cleaner
clean. Do not use any detergents or
solvents.
Always keep the ventilation slots clean
and free.
Only clean the pressure cleaner with a
soft brush or a slightly moist cloth.
If the standard Vario nozzle (19) is
soiled or blocked, you can remove any
foreign bodies in the nozzle using the
nozzle cleaning needle (21). Push the
nozzle tip to the front to switch over to
low-pressure operation. Rotate the noz-
zle tip to move the two metal plates in
the nozzle away from each other. This
enables you to reach the water outlet
opening with the nozzle cleaning nee-
dle (21). Rinse the standard Vario noz-
zle with water to remove the foreign
body.
The nozzle cleaning needle (22) is
located in a slot on the housing on
the side of the bracket for the mains
cable (4) above the wheel (7).
Maintenance
The pressure cleaner is maintenance free.
Ask our service centre to car-
ry out any work that is not
described in these instruc-
tions. Use only original parts.
Storage
Drain all the water from the pressure
cleaner.
Disconnect the unit from the water sup-
ply. Press the On/Off switch (6) to turn
on the pressure cleaner for no longer
than 1 minute until no more water es-
capes from the jet gun(1) or from the
attaching parts (18/19/20). Turn off
the unit.
Store all add-ons (18/19/20) verti-
cally with the connection side facing
downwards.
Protect the pressure cleaner and its ac-
cessories from frost when they have not
been completely drained of all water.
Store the pressure cleaner and its ac-
cessories in a frost-free room.
Waste Disposal
and Environmental
Protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have nished with
them.
Electric appliances should not be
disposed of in the domestic gar-
bage.
Hand the tool in at a recycling centre. The
plastics and metal parts can be separated
and recycled. Ask your Service Center
about this.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 270433 PHD 150 D3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 270433 PHD 150 D3 in the language / languages: English, German, Dutch, Danish, French, Swedish as an attachment in your email.

The manual is 1,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info