745230

Parkside IAN 115767 PMFS 200 A1 Manual

9
Zoom out
Zoom in
Previous page
1/64
Next page
6
PMFS 200 A1
GB
IE
Before use
Fitting/changing the sanding plate
WARNING!
► Always remove the plug from the mains
power socket before carrying out any work
on the appliance.
♦ Use the appropriate sanding plate
for
the corresponding application.
♦ Remove the four screws
.
♦ Remove the pre-fitted sanding plate.
NOTE
The orbital sander plate
can only be fitted
to the appliance in one direction. Please pay
attention to the arrow marks on the orbital
sander plate when doing this. These must
point forwards. With the triangular sander plate
the tip points forwards.
♦ Now fit the required sander plate. Ensure that
the mounting plate B is aligned with the sander
plate. The threaded holes of the mounting plate
B must be aligned with the markings on the
appliance (see Fig. A). The rubber pins A
(only on sander plates and
)
to the holes
in the appliance (see Fig. B).
B
Figure A
A
B
Figure B
♦ Replace the four screws
.
♦ Check that the sander plate is fitted securely.
Select sanding sheet
Removal and surface:
The material removal rate and surface quality are
determined by the grain strength of the sandpaper.
♦ Please note that you need to use sandpapers
with different grains for working the different
materials.
Fitting the sanding sheet
WARNING!
► Always remove the plug from the mains
power socket before carrying out any work
on the appliance.
NOTE
► Before fitting a new sanding sheet, remove
any dust and dirt from the sanding plate
.
Attaching sanding sheets using Velcro:
♦ You can attach the sanding sheet to the sander
plate
using Velcro.
♦ Ensure that the extraction holes on the sanding
sheet match up with those on the sander plate.
Removing sanding sheets fitted using Velcro:
♦ Simply pull the sanding sheet off the sander
plate
(see Fig. A on fold page).
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 115767 PMFS 200 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 115767 PMFS 200 A1 in the language / languages: English, German, Dutch, Danish, Swedish as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info