745230
8
Zoom out
Zoom in
Previous page
1/64
Next page
5
PMFS 200 A1
GB
IE
5. Service
a) Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts. This will ensure that the safety of
the power tool is maintained.
b) Always arrange for the plug or the power
cord to be replaced by the manufacturer of
the appliance or by its approved customer
services. This will ensure that the safety of the
power tool is maintained.
Appliance-specific safety instructions
Secure the workpiece. A workpiece securely
held by a clamping device or vice is much safer
than one held in your hand.
Do not rest your hands next to or in front of the
appliance and the area being worked as there
is a risk of injury if you slip.
In case of danger, remove the plug from the
socket immediately.
Always route the power cord towards the rear,
away from the appliance.
RISK OF FIRE DUE TO FLYING SPARKS!
If you sand metal, sparks will be produced.
Ensure that nobody can be put at risk and that
no combustible materials are located in the im-
mediate vicinity of where you are working.
WARNING! TOXIC VAPOURS!
Working with the tool can produce harmful/
toxic dusts that represent a health hazard for
the person operating the appliance and for
any other people in the area.
WARNING! DANGER FROM DUST!
When working for extended periods of time
on wood and, in particular, materials that
produce dust that is hazardous to health, con-
nect the appliance to an appropriate external
dust extraction appliance. Wear safety gog-
gles and a protective dust mask!
Provide sufficient ventilation when working on
plastics, paints, lacquers, etc.
Do not soak the materials or the area to be
processed with liquids containing solvents.
Never work on moistened materials or damp
surfaces.
Avoid sanding lead paint or other harmful
materials.
Materials containing asbestos may NOT be
processed. Asbestos is a known carcinogen.
Avoid contact with the sanding sheet while the
appliance is running!
Do not use the appliance without a sanding
sheet fitted.
Never use the appliance for other purposes
and only original parts/accessories. Using
attachments or accessory tools other than those
recommended in the operating instructions can
lead to a risk of injury.
Always allow the appliance to come to a
complete standstill before putting it down.
The appliance must always be kept clean, dry
and free from oil or grease.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 115767 PMFS 200 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 115767 PMFS 200 A1 in the language / languages: English, German, Dutch, Danish, Swedish as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info