Manual Parkside IAN 114253 POF 1200 B2 (page 11 of 96) (English, German, Dutch, Swedish)

745236

Zoom out

Zoom in

1/96

GB IE

nails or screws. The milling cutter

can be damaged and lead to in-

creased vibrations.

• Use suitable detectors in order

to nd hidden supply lines or

ask the local utility company.

Contact with electrical cables can lead

to electric shock and re, contact with

a gas pipe can result in an explosion.

Damage to a water pipe can lead to

property damaged and electric shock.

• Do not use any blunt or dam-

aged tools. Blunt or damaged tools

can cause uncontrollable situations.

• Hold the power tool tightly with

both hands while working and

ensure a secure footing. The

power tool is guided more securely

with both hands.

• Wait until the power tool has

stopped before placing it down.

The attachment tools can jam and lead

to a loss of control over the power tool.

• Avoid contact with the tool or

the workpiece immediately af-

ter processing. The parts may be

hot and cause burn injuries.

Residual risks

Even if properly operating and handling

this electric tool, some residual risks will

remain. Due to its construction and build,

this electric tool may present the following

hazards:

a) Injuries caused by moving parts;

b) Ear damage if working without ear

protection;

c) Lung damage, if suitable respiratory

protection is not worn;

d) Eye injuries if no suitable eye protec-

tion is worn.

e) Damage to your health caused by

swinging your hands and arms when

operating the appliance for longer pe-

riods of time or if the unit is not held or

maintained properly.

Warning! During operation, this

electric tool generates an electro-

magnetic eld which, under certain

circumstances, may impair the func-

tionality of active or passive medical

implants. To reduce the risk of seri-

ous or lethal injuries, we recommend

that persons with medical implants

consult their doctor and the manu-

facturer of their medical implant

before operating the machine.

Initial operation

Pull out the power plug before car-

rying out any work on the equip-

ment. There is a risk of electrocution

or of injury from moving parts.

Before you turn on the machine, you must

- insert the desired cutter,

- connect the dust suction,

- adjust the cutting depth,

- mount the parallel stop if necessary,

- clamp in the workpiece.

Inserting/changing cutters

To insert and replace cutters, wear

protective gloves to prevent cuts

and burns.

1. Press the spindle locking button

(16) on the front side of the ma-

chine and keep it pressed down.

2. Use the combination wrench (27)

to loosen the cap nut (8) as much

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 114253 POF 1200 B2 in the language / languages: English, German, Dutch, Swedish as an attachment in your email.

The manual is 2,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 114253 POF 1200 B2 Manual

Product: