458602

Paradyne FrameSaver NP 110 Manual

31
Zoom out
Zoom in
Previous page
1/175
Next page
2 Description
2-14 FrameSaver NP 110 User’s Manual - Installation Guide 980-001-0240B
November
2000
Modem &
Call Director
The integral on-board modem can be switched to any one of several of the interfaces
of the FrameSaver NP 110 by the call director. The call director connects the modem
to the Base module, optional ISDN Adapter module, AUX 1 Port, or AUX 2 Port.
In this way, the modem is used for out-of-band trap reporting (FrameSaver NP 110
Base module, ISDN option module or DTE device connected to an AUX Port) and ac-
cepts incoming calls for management access of the FrameSaver NP 110, DTE device
or any other device connected to an AUX Port.
Figure 2-10 shows a block diagram of the Modem and Call Director.
Fi
g
ure 2-10 Modem & Call Director Block Dia
g
ram
On incoming calls, the modem-to-interface assignment is made based on the DTMF
code detected after the FrameSaver NP 110 line interface goes off-hook and returns a
second Dial Tone.
DTMF code selections are shown in Table 2-1.
Modem parameters may be modified in the database as part of the configuration.
The configuration also includes a periodic self-test option for the modem and a dial
tone test for the dial line (performed every four hours), with results indicated on the
status screen, and failures reported as a Trap on the dedicated facility.
Line
interface
Call Director
Dial
Tone Gen
Modem
DTMF Det
Dial
Line
Base
ISDN
Option
Aux 1
Aux 2
Table 2-1. Call Director DTMF Codes
Interface DTMF Code
Base module (CSU) 1
Aux 1 Port 2
Aux 2 Port 3
ISDN Adapter Module 4
Defaults to Base
module after timeout.
All Others
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Paradyne FrameSaver NP 110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Paradyne FrameSaver NP 110 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info