458602

Paradyne FrameSaver NP 110 Manual

29
Zoom out
Zoom in
Previous page
1/175
Next page
2 Description
2-12 FrameSaver NP 110 User’s Manual - Installation Guide 980-001-0240B
November
2000
WAN Management
IP Address
FrameSaver NP 110 utilizes one IP Address on the dedicated, network-facing Wide
Area Network (WAN) management channel. This address is embedded within the var-
ious communications protocol stacks used for SNMP, Telnet and PPP. The unit’s WAN
Management IP Address may be automatically learned from the first message received
on the management PVC, or it can be set via the local or remote Console Port.
When optioned with ISDN, FrameSaver NP 110 can have several communications
paths that allow the management channel to connect to the frame relay network in dif-
ferent places. Each of these connection points could result in the management PVC
routing through different IP sub-nets to reach the Network Control Center, or it may be
desirable to have the FrameSaver NP 110 appear as a logically different object in the
SNMP manager, especially if static routing and dedicated backup ports are utilized.
The setting/learning of these additional IP Addresses is described in detail in Section
4, “Configuration,” in this manual.
FrameSaver NP 110 will retain in Non-Volatile Memory (NVM), a separate WAN IP
Address for each connection point. All communications via OOB PPP (Out-Of-Band
Point-to-Point Protocol) will utilize whatever IP Address is in effect depending on how
the unit is currently connected to the network. There are several options for establish-
ing the WAN IP Address within the FrameSaver NP 110.
When the unit is shipped from the factory or when NVM is cleared on initial installa-
tion, the WAN IP Address for each connection point is set to 000.000.000.000, which
indicates no address is known.
The WAN IP Address to be used on the T1 link is automatically “learned” from the
first valid IP message received over the unit’s management PVC. Learning will take
place as long as the value of the WAN IP Address in NVM is 000.000.000.000. Once
the IP Address is set or learned it is retained and used until the NVM is cleared or an-
other address is manually set.
Software
Download
The FrameSaver NP 110 system software (firmware) is stored in flash memory. A new
version of the software can be downloaded to the unit for software upgrade, or for res-
toration in the event an error is detected in the flash storage.
A description of the software download process is provided in Section 5, “Diagnos-
tics,” in this manual.
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Paradyne FrameSaver NP 110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Paradyne FrameSaver NP 110 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info