458602

Paradyne FrameSaver NP 110 Manual

22
Zoom out
Zoom in
Previous page
1/175
Next page
2 Description
980-001-0240B FrameSaver NP 110 User’s Manual - Installation Guide 2-5
November 2000
ISDN Bandwidth
On-Demand
Bandwidth On-Demand provides an additional network connection for a second DTE
(router) port based on a request from the DTE. In this configuration the NP 110 ISDN
Adapter is protocol-transparent. The Router determines the protocol used.
A typical network configuration showing simultaneous Bandwidth On-Demand and
Backup connections is shown in Figure 2-5.
Fi
g
ure 2-5 T
pical Simultaneous Bandwidth On-Demand Confi
uration
The bandwidth on-demand process is described as follows:
•
User’s router detects need for bandwidth and raises DTR on its second port.
•
FrameSaver NP 110 ISDN Adapter calls predetermined number.
•
The Central Router answers the call and establishes communications with the
remote Router.
•
Communication commences between Routers.
•
User’s Router lowers DTR to terminate the ISDN connection when the
“demand” has been satisfied.
ISDN Adapter
ML-PPP Support
Because the FrameSaver NP equipment is intended to operate as a demarcation device,
it cannot be dependent on co-located equipment to establish a connection. For this rea-
son, connection-associated parameters reside in the FrameSaver NP. ML-PPP opera-
tion is based on the use of CHAP or PAP ID or Caller ID to associate each incoming
call with the proper ML-PPP bundle. Because the associated router is using a single
physical port, it must be configured for PPP. The ML-PPP engine supports the Link
Configuration Protocol (LCP) required by PPP. In this case, the configuration values
are defined by the ML-PPP RFC, but are communicated to the router to ensure orderly
operation.
ML-PPP is supported on a dial-out basis on the BOD port only.
Frame Relay Cloud
ISDN Cloud
Router
CSU
Router
TA
TA
TA
TA
Bandwidth
On Demand
Bonding
Mode 1 or MLPPP
FrameSaver
NP 110
Switch
Primary Switch
Backup Switch
FrameSaver NP 110
FrameSaver
NP 110
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Paradyne FrameSaver NP 110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Paradyne FrameSaver NP 110 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info