458602

Paradyne FrameSaver NP 110 Manual

20
Zoom out
Zoom in
Previous page
1/175
Next page
2 Description
980-001-0240B FrameSaver NP 110 User’s Manual - Installation Guide 2-3
November 2000
Channel Bank
In configuration (b), voice traffic is delivered toward the network from a PBX through
individual FXS circuits. In this case, the FrameSaver NP 110 terminates the T1 facility
and provides a “drop” function that separates the DS1 into a voice bundle. The bundle
is then delivered to a channel bank for conversion into multiple FXS circuits and a sin-
gle V.35 frame relay User Interface data circuit for the router. This configuration fa-
cilitates inband access to the T1 performance through simple inband transport.
Behind Channel
Bank
In configuration (c), voice traffic is delivered toward the network from a PBX through
individual FXS circuits. In this case, a channel bank terminates the T1 facility and pro-
vides a “drop” function that separates the DS1 into multiple FXS circuits and a single
frame relay User Interface data circuit. These circuits can be delivered to a standard
FrameSaver NP 120 as V.35 or to a standard FrameSaver NP 110 as a DS1.
Second V.35
Drop Port
Figure 2-3 shows an application in which a third bundle of DS0s are integrated into the
T1 stream and delivered to a separate V.35 drop port. In this application, one group of
DS0s are assigned to the customers PBX via the DSX port and used for direct access
to the IXC’s inter-LATA dial network. The second group of DS0s are channeled via
our V.35 User (frame aware) port for use on the customer’s frame relay Virtual Private
Network. Then for security and bandwidth allocation purposes, the third group of
DS0s for Internet access are channelized to a different router via a V.35 Drop port.
Depending on the network architecture, the ISP could be co-located with the IXC DCS
or be remote from it, and the traffic on this bundle may or may not be frame relay.
This configuration could exist with configuration a, b, or c described on the previous
page.
Fi
g
ure 2-3 Inte
g
rated Voice and Dual Data Application
PBX
Router A
DSX Port
Customer Site
Configuration (a)
Router B
User
Port
Drop Port
T1
Voice Switch
NSP POP
Gateway Router
ISP
Frame Switch
DCS
Switch Voice
Cloud
PVN
Frame Relay
Cloud
Internet
Bundle 3 - Frame
Bundle 2 and 3 -Frame
Bundle 1 - Voice
Bundle 2
Frame
DSO Bundle 1 - Voice
DSO Bundle 3 - Frame
DSX-1
V.35
V.35
DSO Bundle 2
Frame
FrameSaver
NP 110
FrameSaver NP 110
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Paradyne FrameSaver NP 110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Paradyne FrameSaver NP 110 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info