568673

Paradigm UltraCube 10 Manual

7
Zoom out
Zoom in
Previous page
1/20
Next page
When using two subwoofers, placing one in the front of the room and the
other in the rear of the room (as shown in Fig. 2) usually provides the best
bass performance and sonic integration. Consult the fine tuning section of
the Owner’s Manual for more information on adjusting phase settings. If
those locations are not possible or if you want to experiment with placement
options using two subwoofers, the following procedure will be a helpful guide
to achieving better bass performance. Refer to “Subwoofer Connection” then
proceed as follows:
1. Temporarily turn all speakers off (either by turning your amplifier off or
disconnecting them);
2. Connect and place one subwoofer in the central area of your listening room.
Follow directions for connection, as outlined in the following section;
3. At a moderately loud level, play music or a video soundtrack with
extended bass that is repetitive or continuous;
4. Walk around your room and note where the bass sounds louder and
where it sounds quieter;
5. Place the first subwoofer within a louder bass area of your room; then
place the second subwoofer within a quieter bass area of your room;
6. Connect both subwoofers and switch all speakers back on; and switch
the amplifier on, or reconnect it;
7. Follow “Fine Tuning” instructions on page 8, to optimize your system’s
overall bass performance.
PLACING TWO SUBWOOFERS IN YOUR LISTENING ROOM
NOTE: The preceding is only a guideline. You may want to use a
bass test disc and SPL meter to more accurately determine the bass
characteristics of your listening room (see Dealer for more information).
Remember that room acoustics vary so it may take some experimenting
with placement to achieve the best subwoofer performance.
subwOOfer CONNeCTiON
SAFETY PRECAUTION: Before proceeding with this
section be sure to read and follow all safety precaution
and instruction notices at the beginning of this manual.
Turn all components OFF before
connecting the subwoofer.
We recommend the use of high-quality cables and connectors when
hooking up your subwoofer (see Dealer).
IMPORTANT: It is important that you become familiar with your powered
subwoofer’s Input/Output Facilities and Control Facilities. Before connecting
your subwoofer, read the following sections.
Facilities vary by model. Inspect your subwoofer’s rear panel and check
mark the facilities that apply to your model.
INPUT/OUTPUT FACILITIES
q Line-Level Input
Allows connection from the Sub/LFE Output of an A/V receiver,
processor, Paradigm
®
X-Series subwoofer control unit (optional) or other
suitable low-level source.
q
Speaker-Level Input
Allows easy connection from the speaker output terminals of an
amplifier or receiver or from the front speakers’ hook-up terminals.
6
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Paradigm UltraCube 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Paradigm UltraCube 10 in the language / languages: French as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info