568708
22
Zoom out
Zoom in
Previous page
1/52
Next page
EN-21
‘SUB’ > ‘WIRELES’ [WIRELESS]> ‘PAIRING STARTED’ >
‘PAIRED’ OR
‘FAILED’: These messages, visible on the
Soundscape’s front-panel display, let you know that your
Soundscape is transmitting a signal that will be picked up by
the supplied wireless subwoofer receiver to initiate pairing
with the external subwoofer.
TIP! With all the options on the previous page, the
Soundscape will operate to approximately 80 Hz below
which the external subwoofer will reproduce lower bass
frequencies.
Menu Option: SOURCE NAME
‘SRC.NAM’ [SOURCE NAME]: Enter the ‘SRC.NAM’ submenu
by pressing the ‘Scroll Right directional button. The
settings in this menu will allow you to assign new names to
display on the soundbar when changing inputs. For example,
you can program theOPTIC 1’ input to display ‘DVD’.
Using the ‘Scroll Up’
/ ‘Scroll Down directional buttons,
you can select and program the following input names:
OPTIC 1 [DIGITAL OPTICAL 1]
OPTIC 2 [DIGITAL OPTICAL 2]
COAX [DIGITAL COAXIAL]
ANALOG [LEFT/RIGHT RCA ANALOG]
BLUTTH [BLUETOOTH]
Choose the input name you want to reprogram and press
the ‘Scroll Right’
directional button. The Soundscape will
display the current name. Pressing the ‘Scroll Up’ / ‘Scroll
Down’
directional buttons will cycle through the available
alpha-numeric characters. Pressing the ‘Scroll Left
/ ‘Scroll
Right directional buttons will move to the next space.
You can use up to seven characters when inputting a new name.
To finish programming an input name, use the
‘Scroll
Left /
‘Scroll
Right directional buttons to move all the way to the
left or right.
Menu Option: LEARN
PLEASE NOTE: There may be remotes that the
Soundscape cannot learn or cannot learn correctly. Due
to the number of remotes on the market it is impossible
to advise which remotes will or will not work.
PLEASE NOTE:
When learning from a second remote, you
may find it does not have buttons that directly correspond
with all available soundbar commands. Not all commands
have to be programmed. Some remotes offer ‘Function
buttons (F1, F2, etc.) that can be used to program unique
soundbar commands.
PLEASE NOTE:
Some remote controls offer discrete ‘Power
On and ‘Power Off buttons. Some offer a single button
to toggle power on and off. The learning function of the
soundbar allows you to program either scenario.
‘LEARN’: Enter the ‘LEARN’ submenu by pressing the
‘Scroll Right
directional button. The settings in this menu
program the soundbar to respond to a second remote
control. Soundscapes factory supplied remote control will
always work with the soundbar, even if the soundbar is
programmed to respond to a second remote.
Using the ‘Scroll Up’
/ ‘Scroll Down directional buttons,
you can ‘Select’ and program the following commands:
PWR.TGL [POWER TOGGLE]
PWR.ON [POWER ON]
PWR.OFF [POWER OFF]
VOL + [VOLUME +]
VOL – [VOLUME –]
MUTE [MUTE VOLUME]
NX.INPT [NEXT INPUT]
PR.INPT [PREVIOUS INPUT]
OPTIC 1 [OPTICAL 1 INPUT]
OPTIC 2 [OPTICAL 2 INPUT]
COAX [COAXIAL INPUT]
ANALOG [LEFT/RIGHT
RCA ANALOG INPUT]
BLUTTH
[BLUETOOTH INPUT]
BT PRV
[PREVIOUS TRACK]
BT PLPS [PLAY/PAUSE]
BT NXT [NEXT TRACK]
UP
DOWN
LEFT
RIGHT
SELECT
MENU
MOVIE
MUSIC
MENU OPTIONS Cont’d
Menu Option: SUB Cont’d
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Paradigm Soundscape at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Paradigm Soundscape in the language / languages: English, French as an attachment in your email.

The manual is 5,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Paradigm Soundscape

Paradigm Soundscape Quick start guide - English - 2 pages

Paradigm Soundscape Quick start guide - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info