568708
21
Zoom out
Zoom in
Previous page
1/52
Next page
EN-20
Menu Option: DISPLAY
DISPLY [DISPLAY]: Enter the ‘DISPLY’ submenu by pressing
the ‘Scroll Right’ directional button. The settings in this
menu allow you to adjust the brightness of the Soundscapes
display and configure the display to turn on and off
automatically.
DISPLY [DISPLAY] > BRIGHT: This option configures the
Soundscapes display to be on at full brightness.
DISPLY [DISPLAY] > DIM: This option configures the
Soundscape’s display to be on at a reduced brightness when
the Soundscape is on. Activate the option by pressing the
‘Select button and the Soundscape will respond with ‘SET’.
DISPLY [DISPLAY] > AUTO OFF: This option configures the
Soundscape’s display to be on at a full brightness when a
setting (such as volume or input) is changed. After a few
seconds, the display will turn off. Activate by pressing the
‘Select button and the Soundscape will respond with ‘SET’.
Menu Option: INSTALL
‘INSTAL [INSTALL]: Enter the ‘INSTAL submenu by pressing
the ‘Scroll Right
directional button. The settings in this
menu will adjust the Soundscape’s equalization and voicing
for optimal performance on the wall or on a flat surface (i.e.
credenza or shelf) installation.
‘INSTAL [INSTALL >ON WALL’: This option configures the
Soundscape’s audio output to sound best in an on-wall
installation. Activate the option by pressing the ‘Select’
button and the Soundscape will respond with ‘SET.
‘INSTAL [INSTALL] > ‘ON.SHELF’ [ON SHELF]: This option
configures the Soundscapes audio output to sound best on
a flat surface (credenzal or shelf) installation. Activate the
option by pressing the ‘Select button and the Soundscape
will respond with ‘SET.
Menu Option: SUB
SUB: Enter the SUB’ submenu by pressing the ‘Scroll Right
directional button. Here you may configure the Soundscape for
external subwoofer integration.
PLEASE NOTE: When you select the ‘SUB’
‘WIRED’
option in the Menu, a wireless connection is no longer
viable until the menu option for wireless is turned
back on. However, when you select ‘SUB’
‘WIRELES’
[WIRELESS] in the menu, the Soundscape will still
support a wired subwoofer connection.
It is possible to connect multiple wired subwoofers using
a Y’ splitter attached to the subwoofer cable, wireless
receiver, or an output on the rear of your subwoofer that
is designed to daisy chaining multiple subs. See your
Paradigm dealer for more information.
‘SUB’ > INTERNL [INTERNAL]: This option allows the
Soundscape to handle all bass information. No external
subwoofer is required or allowed when this mode is
activated. Activate the option by pressing the ‘Select’ button
and the Soundscape will respond with SET.
‘SUB’ > ‘WIRED’ : This option configures the Soundscape
to use an external subwoofer connected with a cable to the
Soundscape’s Sub Out RCA connection. Activate by pressing
the ‘Select button and the Soundscape will respond with ‘SET.
TIP! Reference your external subwoofers Owners Manual
to learn how to correctly adjust level and phase control
to achieve seamless blending with the Soundscape.
‘SUB’ >WIRELES’ [WIRELESS]: Enter the ‘SUB’
WIRELES’
[WIRELESS] submenu by pressing the ‘Scroll Right’
directional button. Using the included wireless subwoofer
receiver you can sync the Soundscape with a Paradigm or
other brand of subwoofer.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Paradigm Soundscape at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Paradigm Soundscape in the language / languages: English, French as an attachment in your email.

The manual is 5,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Paradigm Soundscape

Paradigm Soundscape Quick start guide - English - 2 pages

Paradigm Soundscape Quick start guide - French - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info