597888
20
Zoom out
Zoom in
Previous page
1/36
Next page
20
Useful Information
Installing Software
Flash memory Recovery
If the problem persists after performing “Remove everything and reinstall Windows”, follow the instructions below.
Preparation
l
<Only for model with TPM> Connect the external keyboard.
l
Remove all peripherals.
1 Start the Setup Utility.
A
Display “Charm” and touch - [Change PC settings] - [Update and recovery] - [Recovery].
B
Touch [Restart now] under “Advanced startup”.
C
Touch [Troubleshoot] - [Advanced options] - [UEFI Firmware Settings] - [Restart].
l
If the password is requested, enter the Supervisor Password.
2 Write down all of the contents of the Setup Utility and touch [Exit] and double-touch
[Load Default Values]
.
At the conrmation message, touch [Yes].
3 Check the [UEFI Boot] setting of the Setup Utility.
When installing Windows 8.1: [Enabled]
4 Touch [Exit] and double-touch [Save Values and Reboot].
At the conrmation message, touch [Yes].
The computer will restart.
5 Press (Rotation lock) button while [Panasonic] boot screen is displayed.
The Setup Utility starts up.
l
If the password is requested, enter the Supervisor Password.
6
Touch [Exit] and double-touch [Recovery Partition].
7 Touch [Next].
8 Touch [YES].
9 At the License Agreement screen, touch [Yes, I agree to the provisions above and wish
to continue!] and touch [Next].
10 Touch [Next].
If the option is displayed, select the setting and touch [Next].
[Reinstall Windows to the whole Disk to factory default.]
Select this option when you want to install Windows to the factory default. After installation, you can create a
new partition. For how to create a new partition, refer to “To change the partition structure” (
è
page 13).
11 At the conrmation message, touch [YES].
Installation starts according to the instructions on the screen. (It will take approximately 20 minutes.)
l
Do not interrupt installation, for example by turning off the computer or other operation.
Otherwise installation may become unavailable as Windows may not start up or the data may be corrupted.
12 When Ending process screen is displayed, touch [OK] to turn off the computer.
13 Turn on the computer.
l
If the password is requested, enter the Supervisor Password.
14 Perform the “First-time Operation” (
è
page 12).
NOTE
l
The date and time, and the time zone may not be correct. Be sure to set them correctly.
15 Start the Setup Utility and change the settings as necessary.
16 Perform Windows Update.
17 <Only for model with TPM> Clear TPM (
è
page 19).
DFQW5829ZA_UT-MB_8_OI_M.indb 20 2013/11/11 11:15:58
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic UT-MB5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic UT-MB5000 in the language / languages: English as an attachment in your email.

The manual is 1,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info