597888
19
Zoom out
Zoom in
Previous page
1/36
Next page
19
Useful Information
Installing software will return the computer to the default condition. When you install the software, the ash memory
data will be erased.
Back up important data to other media or an external hard disk before installation.
CAUTION
l
Do not delete the Recovery Partition on the ash memory. The Recovery Partition is not available to store data.
To check the Recovery Partition, perform the following methods.
A
Flick from the middle of the Start screen to the top, and then long touch [This PC] under “Windows System”.
B
Touch [Manage] on app bar.
C
Touch [Disk Management].
NOTE
l
You can use the following buttons instead of the keyboard.
: ↓ key
: ↑ key
: Enter key
: F2 key (Default setting)
l
Connect the AC adaptor and do not remove it until installation is complete.
Remove everything and reinstall Windows
You can reinstall the OS that was pre-installed at the time of purchase (Windows 8.1).
Preparation
l
<Only for model with TPM> Connect the external keyboard.
l
Remove all peripherals.
1 Perform “Remove everything and reinstall Windows”.
A
Display “Charm” and touch
- [Change PC settings] - [Update and recovery] - [Recovery].
B
Touch [Get Started] under “Remove everything and reinstall Windows”.
C
Touch [Next].
D
Select the option.
• Just remove my les
Perform the reinstallation of the Windows in a few moments (Approximately 20 minutes).
• Fully clean the drive
By fully cleaning, the deleted les can not be recovered easily and the security level will be increased. The
processing time will be longer (Approximately 140 minutes).
Follow the on-screen instructions.
After the reinstallation, the computer will restart.
l
Do not interrupt installation, for example by turning off the computer or performing other operation.
Otherwise installation may become unavailable as Windows may not start up or the data may be corrupted.
2 Perform the “First-time Operation” (
è
page 12).
NOTE
l
The date and time, and the time zone may not be correct. Be sure to set them correctly.
3 Perform Windows Update.
4 <Only for model with TPM> Clear TPM.
A
Flick from the middle of the Start screen to the top.
B
Touch [Run] under “Windows System”, input [tpm.msc] and touch [OK].
C
Touch [Clear TPM ...] under “Actions” on the right of the “TPM Manager on Local Computer” screen.
D
Touch [Restart] of the “Manage the TPM security hardware” screen.
The computer will restart.
E
When “TPM conguration change was requested to ...” is displayed, press
F12
.
F
Touch the Desktop tile, and when “TPM is ready” appears, touch [Close].
Installing Software
DFQW5829ZA_UT-MB_8_OI_M.indb 19 2013/11/11 11:15:58
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic UT-MB5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic UT-MB5000 in the language / languages: English as an attachment in your email.

The manual is 1,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info