149172
30
Zoom out
Zoom in
Previous page
1/40
Next page
30
What You See Is What You Record (DIRECT TV RECORDING)
This will allow the immediate recording of the program currently shown on the Television.
Press the DIRECT TV REC button on the remote control
DIRECT
TV REC
If the VCR is in Standby mode with a useable tape inserted, it will auto matically switch on when you press the DIRECT TV REC button.
If a Q-- Link” VCR is connected a message will appear on the TV screen showing what is being recorded, or if it is not possible to record.
Some “Q-- Link” compatible VCR’s will only display the message when on the VCR programme position(0) or in AV mode. Refer to the
VCR operating instruction book.
VCR recording preset prog VCR recording TV source
No recording -- NO TAPE
No recording -- TAPE IS PROTECTED
VCR is recording the programme signal from its
owntuner.IfyouwishyoucanswitchofftheTV
and leave the VCR recording in the normal way.
VCR is recording the programme signal from the television.
You must not change programme position or switch off the TV: if
you do, the VCR will automatically stop recording and switch off.
The write protection tab on the back of the cassette
has been removed.
No recording -- VCR IS PLAYING
No recording -- TAPE MAY BE DAMAGED
VCR Recording VCR external
No recording -- NO SOURCE AVAILABLE
Examples of other messages that might be displayed are:
Recording this programme now
No recording -- ALREADY RECORDING!
TV / VCR Auto Power On
(With a Panasonic Q-- Link VCR connected, this additional featur e is available).
D If you insert a tape in the VCR and press the Play button whilst the TV is in ’Standby’ mode, the TV will automatically switch On
and select the AV2 input so that you can view the tape.
Some other VCR’s may support this feature. Refer to the VCR operating instruction book.
VCR Auto Power Standby
(With a Panasonic Q-- Link VCR connected, this additional featur e is available).
When the TV is switched into ’Standby’ mode, the VCR will also switch into ’Standby’ mode if there is no tape in the VCR, or
ifthereisatapeinandtheVCRisin’Rewind’or’Stop’mode(iftheVCR is rewinding a tape, it will not switch into ’Standby mode until
rewinding has finished).
Some other VCR’s may support this feature. Refer to the VCR operating instruction book.
VCR Image View On
(With a Panasonic Q-- Link VCR connected, this additional featur e is available).
If the TV is in Standby mode and the VCR sends a menu to be displayed on the TV scr een (e.g. Main menu), the TV will auto matically
switch On and the menu will be displayed.
Some other VCR’s may support this feature. Refer to the VCR operating instruction book.
Q-- LINK
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic tx 28 pl 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic tx 28 pl 1 in the language / languages: English as an attachment in your email.

The manual is 3,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info