753693
16
Zoom out
Zoom in
Previous page
1/116
Next page
GB16
Problem Cause and Action
Extra ingredients are not
mixed properly.
Did you add extra ingredients into the bread pan while “ ” is flashing?
Extra ingredients must be added into the bread pan during “ ” is flashing on the display.
My bread has not been
baked.
The dough menu was selected.
The dough menu does not include a baking process.
There has been a power failure, or the machine has been stopped during bread making.
You can try baking the dough in your oven if it has risen and proved.
There is not enough water and the motor protection device has been activated.
This only happens when the machine is overloaded and excessive force is applied to the motor.
Visit place of purchase for a service consultation. Next time, check the recipe and measure out the
correct amount using the measuring cup provided.
You have forgotten to attach the kneading blade.
Make sure you attach the kneading blade first. ( P. GB6)
The kneading mounting shaft in the bread pan is stiff and does not rotate.
If the kneading mounting shaft does not rotate when the kneading blade is attached, you will need to
replace the kneading mounting shaft unit. (Consult the place of purchase or a Panasonic service centre.)
There is excess flour around
the bottom and sides of my
bread.
You have used too much flour, or you are not using enough liquid.
Check the recipe and measure out the correct amount using scales for the flour or the measuring
cup provided for liquids.
The bread does not come
out.
If the bread cannot be easily removed from the bread pan, leave the bread pan for 5 – 10 minutes to
cool, making sure that it is not left unattended where somebody or something may get burnt.
After that, shake the bread pan several times using oven gloves.
(Hold the handle down so that it does not get in the way of bread.)
The kneading blade stays in
the bread when I remove it
from the bread pan.
The dough is a little stiff.
Allow the bread to cool completely before removing the kneading blade carefully.
Some types of flour absorb more water than others, so try adding an extra 10 – 20 mL of water next time.
Crust has built up underneath the kneading blade.
Wash the kneading blade and its spindle after each use.
My gluten free pasta did not
turn well.
Your dough was too soft.
Decrease the water volume or increase the amount of xanthan gum.
Your dough was too hard.
Decrease the amount of xanthan gum or increase the water volume.
When cooking jam, it has
scorched or the kneading
blade fixes and it doesn’t
come off.
The amount of the fruit is too little, or the amount of sugar is too much.
Place the bread pan in the sink and half fill the bread pan with warm water. Leave the bread pan
to soak until the cooked on mixture or kneading blade loosens. After scorching is relieved, wash it
with a soft sponge etc.
The jam has boiled over.
Too much fruit or sugar has been used.
Only use the amounts of fruit and sugar specified in the recipes on P. GB14.
Jam is too runny and not
firmly set.
The fruit was under or over ripe.
Sugar was decreased too much.
Cooking time was insufficient.
Fruit with a low pectin content was used.
Leave the jam to cool completely. The jam will continue to set as it cools.
Use the runny jam as a sauce for desserts.
What kinds of sugar can we
use on jam?
White caster and granulated can be used.
Do not use brown sugar, diet sugar, and low calorie sugar or artificial sweetener.
Troubleshooting
Before calling for service, please check through this section.
During or after cooking
EN OI6 0107.indd 16 2021/4/12 19:07:12
16


Need help? Post your question in this forum.

Forumrules
1

Forum

panasonic-sd-b2510

Reset search

  • Is there an SD-2510 cooking instructions manual for this machine? Submitted on 23-5-2023 at 16:26

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SD-B2510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SD-B2510 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 22,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info