459753
10
Zoom out
Zoom in
Previous page
1/100
Next page
18
English
19
Making Dough
1
32
Turn to P. 25 for
dough recipes
To cancel/stop once
started
(hold for more than
1 second)
Preparations
(P. 14)
Place the kneading blade into the bread pan.
Place the ingredients in the bread pan in the order listed in the recipe.
Set the bread pan into the main unit, and plug the machine into the socket.
Select dough menu
1
[The display shows when menu ‘16’ (SD-2500: ‘15’) is selected.]
Timer is not available on Dough menus
[except menu 22 (SD-2500: 20)].
If you would like to add extra ingredients to your
dough, see P. 16.
Start the machine
2
Estimated time until the selected program is complete
The start light will come on.
For menus other than 22, 26 and 27 (SD-2500:
20, 24 and 25), a ‘Rest’ process will begin
immediately after starting, followed by ‘Knead’
and ‘Rise’.
Press ‘Stop’ and remove dough
3
when machine beeps 8 times and the bar at ‘End’ flashes
The flashing start light will go off.
Shape the finished dough and allow it to rise for
the second time according to the recipe, then
bake in the oven.
Making Brioche Dough
1
42, 3
Turn to P. 25 for
dough recipes
To cancel/stop once
started
(hold for more than
1 second)
Preparations
(P. 14)
Cut the butter for adding later for 1–2 cm cubes and keep them in fridge.
Set the kneading blade into the bread pan.
Place the ingredients in the bread pan in the order listed in the recipe.
Set the bread pan into the main unit, and plug the machine into the socket.
Select
1
menu ‘23’
(SD-2500: ‘21’)
[Simple way to make brioche]
Add butter with other
ingredients at the beginning.
Cut the butter into 2 cm cubes and place them
into the bread pan at the same time as the other
ingredients.
Follow the steps shown on the left. However,
when the machine beeps on step 3 to add extra
butter, please leave as it is.
Time required for completion is 1 hr 50 minutes.
* When butter is added at the beginning, flavour,
texture and rising of bread are a little different from
the time bread is baked with extra butter added in
later.
A ‘Rest’ process will begin immediately after
starting, followed by ‘Knead’ and ‘Rise’.
Start the machine
2
Time until adding the extra butter or ingredients
The start light will come on.
Adding additional butter when the beep
3
sounds, then press ‘Start’ again
Complete placing the additional cubed butter while ‘ is flashing.
After the Start
pad is pressed
Display indicates remaining time until completion of the program
When adding extra ingredients such as raisins,
add them with the butter. (Use max. 150 g for
ingredients)
Even without pressing the Start pad, kneading
will continue after 5 min. It does not continue
kneading immediately, even if the Start pad is
pressed after adding butter or ingredients.
Do not add butter after display shows remaining
time. (P. 35)
Press ‘Stop’ and remove dough
4
when machine beeps 8 times and the bar at ‘End’ flashes
The flashing start light will go off.
Shape the finished dough and allow it to rise for
the second time according to the recipe, then
bake in the oven.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SD-2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SD-2500 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish, Spanish as an attachment in your email.

The manual is 7,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info