618650

Panasonic SCRT50 Manual

44
Zoom out
Zoom in
Previous page
1/52
Next page
44
RQT8655
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the chart
do not solve the problem, refer to “Customer Services Directory” on page 51.
The following do not indicate a problem with this unit:
Power Page
TV screen and video
Displays
≥Regular disc rotating sounds.
≥Poor reception due to atmospheric conditions.
≥Image disturbance during search.
≥Interruptions in reception due to periodic satellite broadcasting
breaks.
≥Operations do not work due to a poor-quality disc. (Try again using a
Panasonic disc.)
≥The unit freezes due to one of its safety devices being activated.
(Press and hold [POWER Í/I] on the main unit for 10 seconds.)
No power. ≥Insert the AC power supply cord securely into a known active AC outlet. 11
(Setup Guide)
The unit switches to the
standby mode.
≥This is a power saving feature. Change “Off Timer” in the Setup menu, if you would prefer.
≥One of the unit’s safety devices is activated. Press [POWER Í/I] on the main unit to turn the
unit on.
37
—
The images from this unit do
not appear on the television.
Picture is distorted.
≥Make sure that the television is connected to the VIDEO OUT terminal, S VIDEO OUT
terminal or COMPONENT VIDEO OUT terminals or HDMI AV OUT terminal on this unit.
≥Make sure that the television’s input setting (e.g., VIDEO 1) is correct.
≥The television isn’t compatible with progressive signals. Press and hold [∫] and [1 a1.3] on
the main unit at the same time for about 5 seconds. The setting will change to interlace.
≥When connecting with a component video cable to a television that is incompatible with
progressive video, check if there is also an HDMI cable connected to the other equipment. If
so, turn the power off to the device connected with an HDMI cable, and set the “HDMI Video
Output” to “Off” in the Setup menu.
≥Picture may not be seen when more than 4 devices are connected with HDMI cables.
Reduce the number of connected devices.
6–10
(Setup Guide)
—
—
39
—
Television reception worsens
after connecting the unit.
≥This can occur because the signals are being divided between the unit and other equipment.
It can be solved by using a signal booster, available from audio-visual suppliers. If it is not
solved by using a signal booster, consult the dealer.
—
Status messages do not appear.
≥Select “Automatic” in “Status Messages” in the Setup menu. 39
The blue background does not
appear.
≥Select “On” in “Blue Background” in the Setup menu. 39
The 4:3 aspect ratio picture
expands left and right.
Screen size is wrong.
≥Use the television to change the aspect. If your television does not have that function, set
“Progressive” in the Video menu to “Off”.
≥If you connect an HDMI cable, set “HDMI Output Display Aspect” in the Setup menu to
“Normal”.
≥Check the settings for “TV Type”, “4:3 TV Settings for DVD-Video” or “4:3 TV Settings for
DVD-RAM” in the Setup menu.
21
39
39
There is a lot of after-image
when playing video.
≥Set “DNR” in the Video menu to “Off”. 21
When playing DVD-Video using
progressive output, one part of
the picture momentarily
appears to be doubled up.
≥Set “Progressive” in the Video menu to “Off”. This problem is caused by the editing method or
material used on DVD-Video, but should be corrected if you use interlace output.
≥When you use the HDMI AV OUT terminal for video output, follow the steps below for setting.
1 Connect this unit to the TV with any cable except the HDMI cable.
2 Set “HDMI Video Output” in the Setup menu to “Off”.
21
—
39
There is no apparent change in
picture quality when adjusted
with the Video menu in the on-
screen menus.
≥The effect is less perceivable with some types of video. —
The display is dim. ≥Change “FL Display” in the Setup menu. 39
“12:00A” is flashing on the
unit’s display.
≥Set the clock. 15
(Setup Guide)
Compared to the actual
recorded time, less remaining
time is displayed.
≥The displayed recording/play time is converted from the number of frames at 29.97 frames
(equal to 0.999 seconds) to one second. There will be a slight difference between the time
displayed and the actual elapsed time (e.g., actual one-hour elapsed time may display as
approximately 59 minutes 56 seconds). This does not affect the recording.
—
The time recorded on the disc
and the available time shown
do not add up.
The play time shown for MP3
does not agree with the actual
time.
≥Times shown may disagree with actual times.
≥Even if you delete recorded content from DVD-R, DVD-R DL, +R or +R DL, there is no
increase in disc space.
≥Available recording space on DVD-RW (DVD-Video format) or +RW increases only when the
last recorded title is deleted. It does not increase if other titles are deleted.
≥Available recording space on DVD-R, DVD-R DL, +R and +R DL reduces if you have
repeatedly recorded and edited more than 200 times or so. (For the second layer on DVD-R
DL and +R DL, this happens after about 60 times.)
≥While searching, the elapsed time may not display correctly.
—
—
—
—
—
“U88” is displayed and the disc
cannot be ejected.
≥The unit is carrying out the recovery process. Do the following to eject the disc.
1Press [POWERÍ/I] on the main unit to switch the unit to standby.
If the unit doesn’t switch to standby, press and hold [POWER Í/I] on the main unit for
about 10 seconds. The unit is forcibly switched to standby.
2 While the unit is off, press and hold [∫] and [CH W] on the main unit at the same time for
about 5 seconds. Remove the disc.
—
“ ” is flashing.
(When using optional wireless
accessory)
≥There is no link between the main unit and the wireless accessory. Check that the wireless
accessory is plugged into the AC outlet.
≥Ensure that the digital transceiver is fully inserted into the slot of the main unit.
—
—
RT-book.book Page 44 Monday, March 27, 2006 5:48 PM
… 44 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCRT50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCRT50 in the language / languages: English as an attachment in your email.

The manual is 7,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SCRT50

Panasonic SCRT50 User Manual - English - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info