There are two types of erasing;
TRACK ERASE: You can erase between 1 and 24 tracks at a time.
ALL ERASE: You can erase all the tracks.
Make sure the disc is record enabled.
Preparation:
Insert the MD (
a
page 12) and press [q/h MD] to select “MD” as the
source then press [g
STOP/CANCEL].
1 While stopped
Press [EDIT MODE] to select “TRACK ERASE?” or
“ALL ERASE?”.
Each time you press the button:
TRACK ERASE?
/ ALL ERASE? / MOVE?
GROUP?
, TITLE ST.? , COMBINE?
2 Press [ENTER].
With TRACK ERASE
3 Press [u/2 REW/ ] or [1/i /FF] to
select the track.
4 Press [ENTER].
Repeat steps 3 and 4 to select other tracks to erase.
5 Press [ENTER].
“UTOC Writing” and “” flash on the display.
TRACK ERASE:
When they stop flashing the track has been erased. The tracks
after it move back to fill the space so there is no missing track
number after a track is erased.
ALL ERASE:
When they stop flashing the disc has been erased and “BLANK
DISC” is shown on the display.
To cancel part way through
Press [g STOP/CANCEL].
You can use TRACK ERASE while playing or paused.
q Press [EDIT MODE] to select “TRACK ERASE?” while the track you
want to erase is playing or paused.
w Press [ENTER] twice.
If “SELECT OVER” is displayed
You have tried to select more than 24 tracks.
You cannot select anymore tracks to erase.
If you erase all tracks
The disc title and any group titles will also be erased.
