618351
25
Zoom out
Zoom in
Previous page
1/28
Next page
VQT2R75
25
Problem Possible solution Pages
Sound eld effects
No sound in surround
mode.
Set to Dolby Virtual Speaker, sound mode or Dolby Pro Logic
.15
Cannot use the sound
mode, Dolby Virtual
Speaker or Dolby Pro
Logic .
With the optical digital connection, you cannot use these
features with LPCM signals with sampling frequency of over
48 kHz. To use these, make the setting to convert the sampling
frequency to 48kHz in the setting such as PCM down sampling
conversion on playback equipment. For details, refer to the
operating Instructions of playback equipment.
12, 13
HDMI
When using an HDMI
connection, the first
few seconds of sound
is cut off.
This may occur if you start play from a chapter on a DVD. The
following will correct the problem.
1 Change the digital audio output setting on the connected
equipment from Bitstream to PCM.
2 Set ON ” for “Setting when the beginning of a CD track is
cut”.
20
The system does not
work properly.
The system does not work properly if you have connected the
HDMI input and output terminals incorrectly. Turn the system
off, unplug the AC mains lead, and make the connection again.
12
VIERA Link “HDAVI
Control” does not
function properly.
Confirm “VIERA Link “HDAVI Control” “OFF/ON” setting” is set
to “CTRL ON ” (When using).
When it is “CTRL OFF ”, change to “CTRL ON ”.
Check VIERA Link “HDAVI Control” settings of the connected
equipment.
VIERA Link “HDAVI Control” may not function when you change
the connections for HDMI equipment, insert and remove the
outlet, or during blackout. Do the following operations in this
case.
x Turn on the TV (VIERA) again while all the equipment
connected with HDMI cables is on.
x Cancel the setting to activate the VIERA Link “HDAVI Control”
function of TV (VIERA) and set it again. For details, refer to
the operating instructions for TV (VIERA).
x Connect this system to TV (VIERA) using the HDMI cable,
switch the TV (VIERA) on, unplug this system’s AC mains
lead, and insert it into a household mains socket again.
19
Could watch TV
(VIERA) when
installed, but now
cannot watch TV.
When using this system in combination with TV (VIERA) only,
connect the HDMI cable to the [HDMI OUT TO TV (ARC)]
terminal.
Even if multi-channel
audio sources,
such as DVD,
Blu-ray disc, are
played back, “SRD”
is not displayed.
When using VIERA Link “HDAVI Control” with the TV (VIERA)
set to “TV”, change the setting to “Home Cinema”.
16, 17
This system’s
input automatically
switches to
AUX2 - STB ”, but
sound is not heard.
Or unexpected sound
from other equipment
is heard.
After “Switching the input automatically to STB, etc.”, the
connection might have been changed. Select “OFF ” once and
SET ” again.
20
Troubleshooting
and other
information
Troubleshooting guide
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCHTX500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCHTX500 in the language / languages: English as an attachment in your email.

The manual is 2,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info