613117

Panasonic SCHT1000PP Manual

15
Zoom out
Zoom in
Previous page
1/56
Next page
15
RQT7061
RECORDING
1 Press [PROG/CHECK].
2 Press [3, 4] to select “New Timer
Program” and press [ENTER].
3 Press [1] to move through the items
and change the items with [3, 4].
≥The current settings are shown each time you press [1].
≥You may use the numbered buttons to enter the CHANNEL,
DATE, ON (Start Time), and OFF (Finish Time).
≥CHANNEL (Channel number and caption)
≥DATE
[. Current date
l;:
l Next day up to one month later minus one day
l;:
l Weekly timer: SUN-SAT>MON-SAT>MON-FRI
l;:
{. Daily timer: WEEKLY SUN>--->WEEKLY SAT
≥ON (Start time)/OFF (Finish time)
The time increases or decreases in 30-minute increments if
you hold the button.
≥MODE (Recording mode ➡ page 12)
SP!#XP!#FR!#EP!#LP
^"""""""""""""""""J
≥Enter Title
Select “Enter Title” using [2, 1] and press [ENTER]
(➡ page 26).
4 Press [ENTER] when you have
finished programming the timer.
Press [3, 4] to select “New Timer Program” and repeat steps 3–4
to program other recordings.
5 Press [PROG/CHECK].
The timer recording list disappears and the message “TURN
RECORDER OFF FOR TIMER RECORDING” is shown on
the television.
6 Press [Í POWER].
The “F” lights on the unit’s display to indicate timer recording
standby has been activated.
Manually programming timer
recordings
CANCEL
TIMER
RECORDING
Remaining Recording Time
RETURN
SELECT
MODE
CHECK
OFFONNo
CHANNEL
DATE
1:58 SP
3/26 TUE 12:55 PM
ENTER
Press ENTER or
VCR Plus+ to
store new program
New Timer Program
01 SP Enable2:00 PM1:00 PM64 ABC 3/ 26 TUE
TIMER
RECORDING
Remaining Recording Time
1:58 SP
3/26 TUE 12:55 PM
3:00 PM
3/ 26 TUE
MODE
OFFON
CHANNEL
DATE
SP
64 ABC
2:30 PM
Enter Title
SP Enable2:00 PM1:00 PM64 ABC 3/ 26 TUE01
MODE
CHECK
OFFONNo
CHANNEL
DATE
1:58 SP
TIMER
New Timer Program
TIMER
RECORDING
Remaining Recording Time
3/26 TUE12:55 PM
SP Enable3:00 PM2:30 PM64 ABC 3/ 26 TUE02
Displayed if the
recording can fit in
the remaining
space on the disc.
∫ To release the unit from recording standby
If you want to record something else before the program start
time, for example:
Press [Í POWER].
The unit turns on and “F” goes out.
≥Be sure to press [Í POWER] to return the unit to standby
mode before the scheduled recording time. Timer recording will
work only if “F” is displayed.
∫ To cancel recording when recording has
already begun
Press [∫], then [ENTER] within 5 seconds.
Recording stops.
[Note]
≥“F” flashes when the unit couldn’t go to timer recording standby
(e.g., a disc isn’t loaded, a disc that can’t be recorded to is
loaded, or the disc is protected). Check the disc carefully.
≥The actual time recorded may be longer than the program itself
when television programs are recorded using VCR Plusi.
≥If you don’t select a recording mode when using VCR Plusi
codes to make a timer recording, the unit sets the mode
selected on the unit at that time (unless the mode is “XP”, in
which case the unit sets “FR” as the mode).
≥“All timer programs are occupied.” appears if there are already
16 programs.
≥The remaining time displayed is based on the current recording
mode.
≥When you program successive timer recordings to start
immediately one after the other, the unit cannot record the part
at the beginning of the later programs (a few seconds when
recording with DVD-RAM and approximately 30 seconds when
recording with DVD-R).
≥If you set DST (Daylight Saving Time) to ON when manually
setting the clock (➡ page 43), timer recording may not work
when summer switches to winter and vice versa.
7061en.book 15 ページ ２００３年６月１６日　月曜日　午前１０時１２分
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCHT1000PP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCHT1000PP in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info