613117

Panasonic SCHT1000PP Manual

13
Zoom out
Zoom in
Previous page
1/56
Next page
13
RQT7061
RECORDING
The unit calculates a recording rate that enables the recording to fit
in the time you set (within the remaining time on the disc) and with
the best possible picture quality.
1 While stopped
Press [F.Rec].
2 Press [2, 1] to select “Hour” and
“Min.” and press [3, 4] to set the
recording time.
You can also set the recording time with the numbered
buttons.
3 Press [3, 4, 2, 1] to select “Start”
and press [ENTER].
Recording starts.
To show the remaining time
Press [STATUS].
[Note]
It may not be possible to record to the end of the program if the
remaining time doesn’t allow.
For your reference
≥Recording time is reduced if you repeatedly pause recording.
≥The recording mode automatically becomes FR mode.
[RAM]
To change the audio recording mode
Press [SHIFT]r[AUDIO].
∫ While receiving MTS audio (Multi-channel
Television Sound Stereo)
[.Stereo: Main audio (stereo)
lv
l SAP: Secondary audio program (SAP)
lv
a- Mono: Main audio (monaural)
e.g., “Stereo” is selected
“((” appears when the unit is receiving
the audio type you selected.
[Note]
≥If you change the sound setting while recording, the recorded
sound will also change. [RAM]
≥If recorded in SAP mode, main audio is also recorded. [RAM]
≥It will not be possible to alter the sound in the following cases:
–When a DVD-R is in the disc tray.
–When recording mode is XP and “LPCM” has been selected in
the Audio menu, “Audio Mode for XP Recording” (➡ page 39).
≥When recording MTS sound onto DVD-R or recording using LPCM,
only one of either the main channel or the sub channel can be
recorded. Select at “Select MTS” (➡ page 39).
≥If the broadcast is “MonoiSAP”, audio will be monaural even if you
select Stereo mode.
≥Select “Mono” if reception is poor during a stereo broadcast.
Pictures being recorded are unaffected.
1 Switch [HOME THEATER, TV] to “TV”.
2 Press [TV/VIDEO] to change the television’s input mode to
“TV”.
3 Press [W X CH] to change channels.
You can also select the channel with the numbered buttons.
This is a simple way of specifying a time to stop recording when you
are in a hurry or before you go to bed.
During recording
Press [¥ REC] to select the recording
time.
Each time you press the button:
0:30 "# 1:00 "# 1:30 "# 2:00 "# 3:00 "# 4:00
^"""""""" Counter (cancel) ,""""""""}
To show the remaining time
Press [STATUS].
For your reference
≥This does not work during timer recordings (➡ page 14) or while
using Flexible Recording (➡ left).
≥Recording stops and the set time is cleared if you press [∫].
≥The set time is cleared if you change the recording mode or
channel while recording is paused.
Preparation
Connect a video cassette recorder to this unit’s input terminals
(➡ page 44).
1 While stopped
Press [INPUT SELECT] to select the
input channel for the equipment you
have connected.
Select L1, L2 or L3.
≥You can also select the input channel by pressing [W X CH].
2 Press [REC MODE] to select the
recording mode (XP, SP, LP or EP).
3 Start play on the other equipment.
4 Press [¥ REC] at the point you want to
start recording.
Recording starts.
To skip unwanted parts
Press [;] to pause recording. (Press again to restart recording.)
To stop recording
Press [∫].
[Note]
≥When recording using L1, L2 or L3 terminals, only the sound
received at the time of recording will be recorded.
≥If Flexible Recording (➡ left) is used instead of steps 2 and 4,
settings can be made so that recording continues to the end of the
video.
Recording the best quality pictures
within the set amount of time—Flexible
Recording
Selecting the audio recording mode
FLEXIBLE REC
Start Cancel
Record on FR mode
ENTER
SELECT
RETURN
Set up rec time
2 Hour 15 Min.
Maximum rec time
1 Hour 00 Min.
CH 12
Stereo
No disc
((
Watching the television while recording
Specify a time to stop recording
Recording from a video cassette
recorder
Almost all videos and DVD software on sale have been
treated to prevent illegal copying. Any software that has
been so treated cannot be recorded using this unit.
e.g.,
7061en.book 13 ページ ２００３年６月１６日　月曜日　午前１０時１２分
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCHT1000PP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCHT1000PP in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info