612856
19
Zoom out
Zoom in
Previous page
1/28
Next page
19
RQT9709
You can set the timer so this unit turns on at a certain
time every day.
Preparation
Set the clock (> 18).
Setting the timer
1 Press [SETUP] repeatedly to select
“TIMER ADJ” and then press [OK].
2 Press [3, 4] to set the starting time
(“ON TIME”) and then press [OK].
3 Press [3, 4] to set the finishing time
(“OFF TIME”) and then press [OK].
To display the timer settings, press [SETUP] repeatedly to
select “TIMER ADJ” and then press [OK] once.
(During standby, press [iPod MENU, DISPLAY] twice.)
The music source and volume will also be displayed if the
timer is turned on. (> below)
Turn the timer on
1 Select the music source*
1
and set the desired
volume.
2 Press [SETUP] repeatedly to select
“TIMER SET” and then press [OK].
3 Press [3, 4] to select “SET” and then press [OK].
F” is displayed.
4 Press [Í] to turn the unit off.
*1: “CD”, “USB”, “IPOD”, “DAB/DAB+” and “FM” can be set as
the music source.
This unit can be used as normal after the timer is set,
however:
Turn the unit to standby mode before the timer start time.
Even if the audio source or the volume is changed, the
timer will still use the audio source and volume that was
set when the timer was turned on.
To turn the timer off, select “OFF” in step 3.
The unit will turn on at the preset time, with the volume
increasing gradually to the preset level.
The sleep timer can turn the unit off after a set time.
1 Press [SETUP] repeatedly to select “SLEEP” and
then press [OK].
2 Press [3, 4] to set the time (in minutes) and then
press [OK].
“SLEEP 30” ,. “SLEEP 60” ,. “SLEEP 90” ,. “SLEEP 120”
^------------------------. OFF (Cancel) (------------------------J
The remaining time is indicated on the unit’s display except
when other operations are performed.
The play timer and sleep timer can be used together. The
sleep timer always has priority.
Others
As a factory preset, this unit will always turn off
automatically if there is no sound output and no
operation for 30 minutes.
To cancel this function
1 Press [SETUP] repeatedly to select “AUTO OFF”
and then press [OK].
2 Press [3, 4] to select “OFF” and then press [OK].
To turn automatic standby on, select “ON” in step 2.
This setting cannot be selected when “DAB/DAB+” or “FM” is
the source.
The brightness of this unit’s display can be changed.
1 Press [SETUP] repeatedly to select “DIMMER”
and then press [OK].
2 Press [3, 4] to select “ON” and then press [OK].
To cancel the dimmer, select “OFF” in step 2.
When other Panasonic equipment responds to the
supplied remote control, change the remote control
code.
1 Press [CD] to select “CD”.
2 Press and hold [CD] on the main unit and [3] on
the remote control until the main unit’s display
shows “REMOTE 2”.
3 Press and hold [OK] and [3] on the remote control
for at least 4 seconds.
To change the mode back to “REMOTE 1”, repeat the steps
above by replacing [3] with [4].
Play timer
Sleep timer
Automatic standby
Display brightness
Changing the main unit and
remote control code
SC-HC57DB~RQT9709-1B.book Page 19 Friday, March 2, 2012 3:31 PM
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCHC57DBEB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCHC57DBEB in the language / languages: English as an attachment in your email.

The manual is 4,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info