612799
10
Zoom out
Zoom in
Previous page
1/40
Next page
Simple setup
RQT6924
10
C
CENTER
2 Screw a screw (not included) into the
wall.
3 Fit the speaker securely onto the
screw with the hole.
Other speaker setup options
Caution
Use the speakers only with the recommended system.
Failure to do so may lead to damage to the amplifier
and/or the speakers, and may result in the risk of fire.
Consult a qualified service person if damage has oc-
curred or if you experience a sudden change in per-
formance.
Do not attempt to attach these speakers to walls using
methods other than those described in this manual.
Attatching to a wall
Fitting speaker stands (optional)
[Note]
The wall or pillar on which the speakers are to be attached should
be capable of supporting 5 kg per screw.
1 Remove the stand.
BEFORE REMOVING THE STAND
Take the speaker cable out of the stands hole if it is
threaded through.
Lay the speaker on a soft cloth.
Unscrew the screw with a Phillips-head screwdriver.
Preparation
Remove the stand ( step 1 above).
Ensure the stands meet these conditions before purchasing them.
Observe the diameter and length of the screws and the distance
between screws as shown in the diagram.
The stands must be able to support over 5 kg.
The stands must be stable even if the speakers are in a high posi-
tion.
Notes on speaker use
You can damage your speakers and shorten their useful life if you
play sound at high levels over extended periods.
Reduce the volume in the following cases to avoid damage.
When playing distorted sound.
When the speakers are receiving howling from a record player,
noise from FM broadcasts, or continuous signals from an oscil-
lator, test disc, or electronic instrument.
When adjusting the sound quality.
When turning the unit on or off.
If irregular coloring occurs on your television
These speakers are designed to be used close to a television, but
the picture may be affected with some televisions and setup
combinations.
3035 mm
7.59.4 mm
811 mm
60 mm
5 mm
pitch 0.8 mm
Pass the cable
through the hole.
Pass through the
cutout in the base.
Wall
Stand
Insert and tighten
screw.
(Center and surround speakers only)
If this occurs, turn the television off for about 30 minutes.
The televisions demagnetizing function should correct the
problem. If it persists, move the speakers further away from the tele-
vision.
Attach the stands with
these holes.
Plate thickness plus
7 to 10 mm
Speaker stand
(not included)
Keeping the cables out of the way
Pass the cables through the holes in the stand to keep them out of the way.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCDT310EB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCDT310EB in the language / languages: English as an attachment in your email.

The manual is 1,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info