612799
39
Zoom out
Zoom in
Previous page
1/40
Next page
39
RQT6924
Reference
Picture
Listening to the radio
Unit displays
Press [FL DISPLAY] to turn the display on. N
You inserted a disc the unit cannot play; insert one it can. 5
You inserted a blank DVD-RAM.
You havent inserted a disc; insert one.
You havent inserted the disc correctly; insert it correctly. =
The audio cable was removed or inserted while the power was on and the volume was on high, or
there was a speaker cable short.
If the problem is not solved by turning the power back on, there is a power supply problem.
Consult your dealer.
The disc is dirty. Wipe it clean. 5
Incorrect operation performed. Read the instructions and try again.
Trouble is likely to have occurred. The number following H depends on the status of the unit.
Reset procedure:
Press [Í] to switch the unit to the standby mode and then back to ON. Alternatively, press [Í] to
switch the unit to the standby mode, disconnect the AC mains lead, and then reconnect it.
If the service numbers fail to clear, note the service number and contact a qualified service person.
No on-screen display.
GUI screens not displayed or only
partially displayed on the
television.
The discs menu is displayed in a
different language.
Television displays
Sound
An AC mains lead or fluorescent light is near the cables. Keep other appliances and cords
away from this units cables.
Check that the subwoofer has not been set to SUB W OFF. M
Picture distorted.
No picture.
The picture shown on the television
is not normal.
(The sides of the picture are cut off,
the picture is stretched horizontally
or black bands appear at the top
and bottom of the screen.)
Picture quality is poor.
The picture on the television
disappears or stripes appear on
the screen.
Menus not displayed correctly.
This unit's display is off.
NO PLAY
NO DISC
F61 (The unit powers down
thereafter)
DVD U11
ERROR
DVD H∑∑
∑∑ stands for a number.
Noise is heard.
ST flickers or doesnt light.
Sound is distorted.
A beat sound is heard.
A low hum is heard during AM
broadcasts.
The correct AM frequency can't be
tuned in.
Some distortion is normal during SEARCH.
The screen may be disrupted briefly when you turn on and off the AUDIO ONLY feature. M
Check the connection. 8
Make sure the television is on.
Ensure the televisions video input setting (e.g., VIDEO 1) is correct.
Go to Video in the SETUP menus, and change TV Aspect to suit your television. O
Use the television to change the aspect to the correct one.
[For[
Southeast[Asia,[Australia[and[N.Z.
[
If your television cannot change the aspect, try changing 4:3 Aspect with the GUI screen. H
Ensure that the unit is connected directly to the television, and is not connected through a video
cassette recorder.
Change the size with the variable zoom function. B
Check the settings in the GUI screens Picture menu. H
The location and orientation of the antenna are incorrect. If you are using an indoor antenna,
change to an outdoor antenna. T
The television antenna wire is too close to the unit. Move the antenna wire of the television from
the unit.
Change the zoom ratio to k1.00. B
With the GUI screen, change Subtitle Position to 0. H
[For[
Southeast[Asia,[Australia[and[N.Z.
[
With the GUI screen, change 4:3 Aspect to Normal. H
Humming heard during play.
No sound from the subwoofer.
Adjust the position of the FM or AM antenna.
Use an outdoor antenna. T
When receiving an AM broadcast, press [SETUP] and select MODE A or MODE B.
Turn the television off or move it away from the unit.
Move the antenna away from other cables and cords.
Change the frequency step. Press [SELECT] to select AM, then press and hold [SELECT] for 10
seconds to change the step to suit your area.
I
Go to Display in the SETUP menus, and select On for On-Screen Messages. O
Press [3, 4] while the rightmost icon is highlighted to move them down. F
Go to Disc in the SETUP menus, and select the preferred language for Menus. O
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCDT310EB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCDT310EB in the language / languages: English as an attachment in your email.

The manual is 1,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info