612779
39
Zoom out
Zoom in
Previous page
1/48
Next page
Reference
SQT0935
39
No power.
Ensure the AC mains lead of the active
subwoofer is connected properly.
After turning the subwoofer on, it
immediately turns off.
Unplug the AC mains lead and consult your
dealer.
No sound from the subwoofer.
Check that the active subwoofer is turned on.
Check that the WIRELESS LINK indicator
lights green. (> 19)
The WIRELESS LINK indicator lights red.
There is no link between the main unit and the
active subwoofer.
jCheck that the main unit is turned on.
jTurn the active subwoofer off and then back
on. Alternatively, turn the active subwoofer
off, disconnect the AC mains lead and then
reconnect it.
The active subwoofer and the main unit may
not be paired correctly. Try the following
operation. (Wireless pairing)
1 Turn on the main unit and active
subwoofer.
2 Press and hold [I/D SET] on the rear of
the active subwoofer for more than 3 sec.
(The WIRELESS LINK indicator will blink
in red.)
3 While pressing and holding [INPUT] on
remote control, touch and hold [VOL i]
on the main unit for more than 4 sec.
(“SUBWOOFER PAIRING” will be
indicated on the display.)
When the wireless pairing is successful,
“PAIRED” will be indicated on the display for
2 sec and WIRELESS LINK indicator lights
green.
4 Turn the main unit off and on.
Consult your dealer if the problem persists.
“F61”
There is a problem with the amplifier of the
system.
Disconnect the AC mains lead and consult the
dealer.
“F70 HDMI” / “U701” / “U703”
Check HDMI connection.
Turn off the main unit and then switch it on
again.
Disconnect the HDMI cable.
“F703” / “F704”
Turn off the main unit and then switch it on
again.
Consult your dealer if the problem persists.
“F76”
There is a problem with the power supply.
Disconnect the AC mains lead and consult the
dealer.
“U704”
This system is receiving unsupported video
format signal from the input source.
Change the video resolution setting on the
connected device. (Refer to the operating
instructions for the device.)
If there is no image, connect the device
directly to the TV to change the settings.
“U705”
The TV’s HDMI terminal connected to the main
unit or the TV’s setting is not compatible with the
HDCP 2.2 playback source.
Ensure to connect to the TV’s HDCP 2.2
compatible terminal.
Ensure the TV’s HDMI HDCP setting
corresponds to HDCP 2.2.
(Refer to the operating instructions for the TV.)
Active Subwoofer Main unit displays
SC-ALL70T-SQT0935.book 39 ページ 2015年4月28日 火曜日 午前10時5分
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCALL70TEB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCALL70TEB in the language / languages: English as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SCALL70TEB

Panasonic SCALL70TEB Quick start guide - English - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info