612779
37
Zoom out
Zoom in
Previous page
1/48
Next page
Reference
SQT0935
37
Pairing cannot be done.
Check the Bluetooth
®
device condition.
The device cannot be connected.
The pairing of the device was unsuccessful or
the registration has been replaced. Try pairing
the device again. (> 27)
This system might be connected to a different
device. Disconnect the other device and try
pairing the device again.
The device is connected but audio cannot be
heard through this system.
For some Bluetooth
®
devices, you have to set
the audio output to “SC-ALL70T” manually.
Read the operating instructions for the device
for details.
Connection is interrupted.
Sound is interrupted/sound skips/there is a
lot of noise.
Remove any obstacle between the main unit
and the device.
Other devices that use the 2.4 GHz frequency
band (wireless router, microwaves, cordless
phones, etc.) are interfering. Bring the
Bluetooth
®
device closer to the main unit and
distance it from the other devices.
Select “MODE 1” for stable communication.
(> 30)
If the above does not fix the problem, you may
be able to fix the problem by reconnecting this
unit and the Bluetooth
®
device. (> 27)
The One-Touch Connection (NFC feature) is
not working.
Make sure the main unit and the NFC feature
of the device are turned on. (> 27)
Change the touch location of the Bluetooth
®
device or main unit and then touch the NFC
touch area again.
No sound (or image).
Turn muting off. (> 23)
Check the connections to the other devices.
(> 9, 10, 11)
Make sure that the received audio signal is
compatible with this system. (> 42)
Turn this system off and then on again.
If the main unit is connected to the TV with
only an HDMI cable, make sure that the TV’s
HDMI terminal is labelled “HDMI (ARC)”. If
not, connect using the optical digital audio
cable. (> 9)
If the main unit is connected to a Panasonic
TV and turned on using the remote control or
the touch key on the main unit, sound might
not be output from this system. In this case,
turn the main unit on using the TV’s remote
control. (> 33)
If the connections are correct, there might be
a problem with the cables. Redo the
connections with different cables.
Check the audio output settings on the
connected device.
The dual audio cannot be changed from
main to secondary.
If the audio received from the connected device
is not “Dolby Dual Mono” or the output setting is
not “Bitstream”, the setting cannot be changed
from this system. Change the setting on the
connected device.
The volume is lowered when the main unit is
turned on.
“VOL LIMITATION” is on.
If the main unit is turned off with the volume
setting in the greater half (above 50), the main
unit will automatically lower the volume to the
middle (50) when the main unit is turned on.
(> 30)
Bluetooth
®
Sound
SC-ALL70T-SQT0935.book 37 ページ 2015年4月28日 火曜日 午前10時5分
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SCALL70TEB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SCALL70TEB in the language / languages: English as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SCALL70TEB

Panasonic SCALL70TEB Quick start guide - English - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info