370688
29
Zoom out
Zoom in
Previous page
1/68
Next page
29
RQT8672
Recording from a satellite/digital terrestrial receiver
[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
See also the notes “Important notes for recording”
(22).
Preparation
Press [THEATER] to switch the remote control to operate
this unit.
Insert a disc (24).
When recording a bilingual programme (22).
Preparation
Connect a satellite/digital terrestrial receiver to this unit’s
input terminals (13).
When the output signal from the external equipment is
NTSC, change the “TV System” to “NTSC” in the Setup
menu (54).
Press [DVD] to select the DVD drive.
1 While stopped
Press [INPUT] to select the input
channel for the equipment you have
connected.
e.g. If you have connected to AV2 input terminals,
select “AV2”.
2 Press [REC MODE] to select the
recording mode.
3 Select the channel on the other
equipment.
4 Press [¥ REC].
Recording starts.
To skip unwanted parts
Press [;] to pause recording. (Press again to restart
recording.)
To stop recording
Press [].
To record programmes from a SKY Digital STB/digital
terrestrial receiver using timer programming
Preparation
Make sure you connect the AV2 input terminal of this unit to
“VCR Scart Terminal” of a SKY Digital STB/digital
terrestrial receiver with a 21-pin Scart lead (13).
Set “AV2 Input” and “Ext Link” to match the connected
equipment in the Setup menu (51).
1 Make timer programming on SKY
Digital STB/digital terrestrial receiver.
2 Press [DVD] or [AUX] to select the
DVD drive or “AUX”.
3 Press [EXT LINK].
The unit turns off and “EXT-L” lights on the unit’s display
to indicate timer recording standby has been activated.
To cancel the external control
Press [EXT LINK] to stop recording or to cancel linked timer
recording standby.
In order to prevent accidental operation, press [EXT LINK]
to cancel the setting after recording is finished.
[Note]
[EXT LINK] will function even when the unit is in standby
mode, if the DVD drive is selected.
In the following situations, [EXT LINK] will not function:
–“FM”, “AM”, or “F MUSICP” is selected as the source.
–A source other than DVD drive is selected while the unit is
in standby mode.
This function does not work with some equipment. Refer to
the equipment’s operating instructions.
The beginnings of recordings may not be recorded
correctly in some cases.
When “Ext Link” is set to “Ext Link 2”, this function does not
work if the input signal is NTSC system.
Programmes are recorded as one title on this unit when the
end time of the earlier timer recording and the start time of
the later timer recording are close to each other.
[RAM] To divide the titles, go to “Divide Title” (39).
While the unit is in EXT LINK standby mode or recording,
video picture is from the AV2 input terminal irrespective of
“AV1 Output” setting (51).
While the unit is in EXT LINK standby mode or recording,
only the following operations can be performed.
–Programming timer recording (Press [VIDEO Plusr] or
[PROG/CHECK]).
–Playing the title
[RAM] (Press [1](PLAY) or
[DIRECT NAVIGATOR]).
You cannot eject a disc while the unit is in EXT LINK
standby mode.
Manual Recording
VIDEO Plus
+
;
¥ REC
DVD
INPUT
REC MODE
THEATER
EXT LINK
AUX
1
DIRECT
NAVIGATOR
PROG/CHECK
VIDEO Plusi
Linked timer recordings with external
equipment (SKY Digital STB/digital
terrestrial receiver) — EXT LINK
Timer recording / Recording from a satellite/digital terrestrial receiver
RT70-30.book Page 29 Thursday, April 13, 2006 1:45 PM
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic sc rt 70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic sc rt 70 in the language / languages: English as an attachment in your email.

The manual is 5,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic sc rt 70

Panasonic sc rt 70 User Manual - German - 12 pages

Panasonic sc rt 70 User Manual - German - 156 pages

Panasonic sc rt 70 User Manual - Dutch - 12 pages

Panasonic sc rt 70 User Manual - Dutch - 208 pages

Panasonic sc rt 70 User Manual - Danish - 12 pages

Panasonic sc rt 70 User Manual - Danish - 208 pages

Panasonic sc rt 70 User Manual - French - 12 pages

Panasonic sc rt 70 User Manual - French - 156 pages

Panasonic sc rt 70 User Manual - Italian - 12 pages

Panasonic sc rt 70 User Manual - Italian - 156 pages

Panasonic sc rt 70 User Manual - Swedish, Spanish - 208 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info