618142
22
Zoom out
Zoom in
Previous page
1/28
Next page
22
RQT9834
The main unit is automatically switched to
standby mode.
The auto standby function is on.
The main unit will automatically switch to standby
mode when no signal is input and no operation is
performed for approx. 2 hours. Refer to page 20 to
turn this function off.
The main unit is turned off when the TV’s
speakers are selected in the speaker control.
This is a normal feature when using VIERA Link
(HDAVI Control 4 or later). Please read the
operating instructions for the TV for details about its
power save feature. (> 19)
The , DTS or PCM indicators blink for 10
sec and then turn off.
Are you changing the Audio output modes
settings? (> 18)
Are you changing the 3D sound settings? (> 20)
Are you changing the dual audio settings? (> 20)
Are you changing the auto standby function
settings? (> 20)
Are you changing the Remote control code
settings? (> 20)
This system does not operate correctly.
If the HDMI cable is connected to the wrong
terminal (HDMI IN or HDMI OUT), this system will
not operate correctly. Turn the main unit off,
disconnect the AC mains lead and reconnect the
HDMI cable(s). (> 14, 15)
VIERA Link related operations no longer
function properly.
Check the VIERA Link setting on the connected
devices.
Have you turned the VIERA Link settings off?
(> 21)
When the HDMI connections are changed, after a
power failure or after the AC mains lead has been
removed, VIERA Link operations may not
function properly.
jTurn on all the devices that are connected to
the TV with an HDMI cable and then turn the
TV on.
jTurn off the VIERA Link settings of the TV and
turn it on again. For details refer to the
operating instructions for the TV.
jWhile the main unit and the TV are connected
with the HDMI cable, turn on the TV and then
remove the main unit’s AC mains lead cord and
reconnect it again.
The first few seconds of audio cannot be heard
when using the HDMI connection.
This may occur during DVD-Video chapter
playback. Change the digital audio output setting
on the connected device from “Bitstream” to “PCM”.
When operating an HDMI compatible device of a
different brand, the main unit reacts in an
unwanted manner.
HDAVI Control commands may use a different
signal depending on the brand of the device. In this
case, turn VIERA Link off. (> 21)
No sound (or image).
Turn muting off. (> 17)
Check the connections to the other devices.
(> 14, 15)
Make sure that the received audio signal is
compatible with this system. (> 24)
Turn this system off and then on again.
If the main unit is connected to the TV with only
an HDMI cable, make sure that the TV’s HDMI
terminal is labelled “HDMI (ARC)”. If not, connect
using the optical digital audio cable. (> 14)
If the main unit is connected to a Panasonic TV
and turned on using the button on the main unit
or the remote control, sound might not be output
from this system. In this case, turn the main unit
on using the TV’s remote control. (> 19)
If the connections are correct, there might be a
problem with the cables. Redo the connections
with different cables.
Check the audio output settings on the connected
device.
When the and DTS indicators blink and
there is no audio output from this system, turn
this system off, remove the AC mains lead and
consult you dealer.
If the BD/DVD indicator flashes and there is no
audio output, try the following.
1 Turn the connected device off and then on.
2 Turn off the main unit, remove the HDMI
cable, then reconnect the HDMI cable and
turn the main unit back on.
HDMI
Sound
SC-HTB527EGEB_RQT9834-B.book 22 ページ 2012年12月10日 月曜日 午前11時29分
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SC-HTB527 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-HTB527 in the language / languages: English as an attachment in your email.

The manual is 5,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SC-HTB527

Panasonic SC-HTB527 Quick start guide - English - 1 pages

Panasonic SC-HTB527 User Manual - German - 28 pages

Panasonic SC-HTB527 User Manual - German, Dutch - 24 pages

Panasonic SC-HTB527 User Manual - Dutch - 76 pages

Panasonic SC-HTB527 User Manual - Danish - 76 pages

Panasonic SC-HTB527 User Manual - Danish, French - 24 pages

Panasonic SC-HTB527 User Manual - French - 76 pages

Panasonic SC-HTB527 User Manual - Italian - 24 pages

Panasonic SC-HTB527 User Manual - Italian - 76 pages

Panasonic SC-HTB527 User Manual - Polish - 76 pages

Panasonic SC-HTB527 User Manual - Polish - 24 pages

Panasonic SC-HTB527 User Manual - Swedish - 76 pages

Panasonic SC-HTB527 User Manual - Swedish - 24 pages

Panasonic SC-HTB527 User Manual - Spanish - 76 pages

Panasonic SC-HTB527 User Manual - Spanish - 24 pages

Panasonic SC-HTB527 User Manual - Finnish - 76 pages

Panasonic SC-HTB527 User Manual - Finnish - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info