618142
20
Zoom out
Zoom in
Previous page
1/28
Next page
20
RQT9834
Advanced operations
Change the dual audio from main to secondary.
This setting will only work if the audio output
setting on the connected TV or player, etc. is set
to “Bitstream” and dual audio is available in the
audio source.
Press and hold [BD/DVD] for more
than 2 sec.
While the indicator of the current
setting is flashing, press [BD/DVD] to
change the setting.
A Main
B Secondary (SAP: Secondary Audio Program)
A, B: Main and secondary
The indicator for the selected setting flashes for
10 seconds and then exits the setting mode.
The setting is maintained until it is changed again.
The default setting of this function is main.
If no signal is input and no operation is performed for
2 hours, the main unit will switch to standby mode.
To change the setting of this function:
Press and hold [INPUT SELECTOR]
on the main unit for more than 2 sec.
While the indicator of the current setting
is flashing, press [INPUT SELECTOR] to
change the setting.
A Auto standby function is on.
B Auto standby function is off.
The indicator for the selected setting flashes for
10 seconds and then exits the setting mode.
The setting is maintained until it is changed again.
The default setting of this function is on.
Depending on your preference, It is possible to turn off
the 3D surround effect and the clear-mode dialog effect.
Press and hold [TV] for more than 2 sec.
While the indicator is blinking, press
[TV] to change the setting.
A 3D surround effect and clear-mode dialog
effect is on.
B 3D surround effect and clear-mode dialog
effect is off.
The indicator for the selected setting flashes for
10 seconds and then exits the setting mode.
This setting will be reset to on when the main unit is turned
off.
When off is selected, the dialog effect level cannot be
adjusted.
Remote control code
When other Panasonic devices respond to this
system’s remote control, change the remote control
code on this system and the remote control.
Preparation
Turn off all other Panasonic products.
Turn on the main unit.
Change the remote control code to code 2:
1 Aim the remote control at the main unit’s
remote control sensor.
2 Press and hold [MUTE] and [BD/DVD] on the
remote control for more than 4 sec.
A will blink for 10 sec when the code of this system
is changed.
The setting is maintained until it is changed again.
If the main unit does not operate after changing the code,
repeat steps 1 and 2.
To change the remote control to code 1, repeat the steps
above, but replace [BD/DVD] with [TV].
Changing the dual audio
Auto standby function
TV
BD/DVD
DTS PCMD
A B
TV
BD/DVD
DTS PCMD
A B
Using the Dolby
Virtual Speaker effect
Others
TV
BD/DVD
DTS PCMD
A B
TV
BD/DVD
DTS PCMD
A
SC-HTB527EGEB_RQT9834-B.book 20 ページ 2012年12月10日 月曜日 午前11時29分
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SC-HTB527 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-HTB527 in the language / languages: English as an attachment in your email.

The manual is 5,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SC-HTB527

Panasonic SC-HTB527 Quick start guide - English - 1 pages

Panasonic SC-HTB527 User Manual - German - 28 pages

Panasonic SC-HTB527 User Manual - German, Dutch - 24 pages

Panasonic SC-HTB527 User Manual - Dutch - 76 pages

Panasonic SC-HTB527 User Manual - Danish - 76 pages

Panasonic SC-HTB527 User Manual - Danish, French - 24 pages

Panasonic SC-HTB527 User Manual - French - 76 pages

Panasonic SC-HTB527 User Manual - Italian - 24 pages

Panasonic SC-HTB527 User Manual - Italian - 76 pages

Panasonic SC-HTB527 User Manual - Polish - 76 pages

Panasonic SC-HTB527 User Manual - Polish - 24 pages

Panasonic SC-HTB527 User Manual - Swedish - 76 pages

Panasonic SC-HTB527 User Manual - Swedish - 24 pages

Panasonic SC-HTB527 User Manual - Spanish - 76 pages

Panasonic SC-HTB527 User Manual - Spanish - 24 pages

Panasonic SC-HTB527 User Manual - Finnish - 76 pages

Panasonic SC-HTB527 User Manual - Finnish - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info