502227
24
Zoom out
Zoom in
Previous page
1/32
Next page
24
No sound (or image).
Turn muting off. (> 20)
Check the connections to the other devices.
(> 16, 17)
Make sure that the received audio signal is
compatible with this unit. (> 25)
Turn this unit off and then on again.
If this unit is connected to the TV with an HDMI
cable. Make sure that the TV’s HDMI terminal is
labeled “HDMI (ARC)”. If not, connect using the
optical digital audio cable. (> 16)
If this unit is connected to a Panasonic TV and
this unit is turned on using the button on this unit
or the remote control, sound might not be output
from this unit’s speakers. In this case, turn this
unit on using the TV’s remote control. (> 16)
If the connections are correct, there might be a
problem with the cables. Reconnect the unit with
different cables.
Check the audio output settings on the connected
device.
When the and DTS indicators blink and
there is no audio output from this unit, turn the
unit off, remove the AC mains lead and consult
you dealer.
If the BD/DVD indicator flashes and there is no
audio output, try the following.
1 Turn the connected device off and then on.
2 Turn off this unit, remove the HDMI cable,
then reconnect the HDMI cable and turn this
unit back on.
DTS audio cannot be output from this unit.
Make sure that the digital audio output setting on
the connected device is set to “Bitstream”.
The audio output cannot be changed from main
to secondary.
If the digital output setting of TV or player is set to
“Bitstream” change the audio output on this unit.
1 Press and hold [BD/DVD] for more than 2 sec.
2 While the indicator of the current setting is
flashing, press [BD/DVD] to change the setting.
A Main and secondary
B Main
C Secondary (SAP: Secondary Audio Program)
The setting is maintained until it is changed
again.
The volume is lowered when the unit is turned
on.
If this unit is turned off with the volume setting in the
greater half (above 50), this unit will automatically
lower the volume to the middle (50) when the unit is
turned on.
To turn off this function:
1 Press and hold [MUTE] on the remote control
and [VOLUME i] on this unit for more than 2
sec.
The setting is changed when the , DTS and
PCM indicators blink.
To reset the setting, return to the factory preset.
(> 23)
The audio from the TV is distorted.
Change the TV’s digital audio output settings to
“Bitstream”.
The dialog is too persistent or the dialog does
not sound natural.
This unit has a function to make the dialog stand
out when the volume is low.
To turn off this function:
1 Press and hold [TV] on the remote control and
[VOLUME s] on this unit for more than 2 sec.
The setting is changed when the , DTS and
PCM indicators blink.
To reset the setting, return to the factory preset.
(> 23)
There is no audio.
This unit turns off automatically.
(When this unit detects a problem, a safety
measure is activated and this unit automatically
switches to standby mode.)
There is a problem with the amplifier.
Is the volume extremely high?
If so, lower the volume.
Is this unit placed in an extremely hot place?
If so, move the unit to a cooler place and wait a
few moments and then try to turn it on again.
If the problem persists, turn the unit off and remove
the AC mains lead cord and consult your dealer.
Please be sure to remember the indicators that
were blinking and inform the dealer.
Sound
D
TV
BD/DVD
DTS PCMD
A
B C
D
D
SC-HTB520EGEBGNGS_RQTX1279-B.book Page 24 Tuesday, February 22, 2011 9:05 AM
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SC-HTB520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-HTB520 in the language / languages: English as an attachment in your email.

The manual is 5,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SC-HTB520

Panasonic SC-HTB520 User Manual - Dutch - 160 pages

Panasonic SC-HTB520 User Manual - Polish - 136 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info