502227
23
Zoom out
Zoom in
Previous page
1/32
Next page
Reference
23
Operations
Troubleshooting
Before requesting service, make the following
checks. If you are in doubt about some of the check
points, or if the solutions indicated in the following
guide do not solve the problem, consult your dealer
for instructions.
No power.
Insert the AC mains lead securely. (> 19)
After turning this unit on, if the indicators blink
and this unit immediately turns off, unplug the AC
mains lead and consult your dealer.
The remote control does not work properly.
The battery is depleted. Replace it with a new
one. (> 8)
It is possible that the insulation sheet has not
been removed. Remove the insulation sheet.
(> 8)
It may be necessary to set the code of the remote
control again after changing the battery of the
remote control. (> 25)
The “TV” indicator blinks, but there is no sound.
Remove the AC mains lead cord and consult your
dealer. If there are any other indicators blinking, be
sure to inform the blinking indicators to your dealer.
The , DTS, PCM indicators blink for 10 sec
and then turn off.
Are you changing the playback mode settings?
(> 21)
Are you changing the 3D sound settings? (> 21)
Are you changing the audio output settings?
(> 24)
Power of this unit is turned off when the input
for the TV is changed.
This is a normal feature when using VIERA Link
(HDAVI Control 4 or later). For details please read
the Operating Instructions for the TV.
This unit does not operate correctly.
If the HDMI cable is connected to the wrong
terminal (HDMI AV IN or HDMI AV OUT), this unit
will not operate correctly. Turn this unit off,
disconnect the AC mains lead and reconnect the
HDMI cable(s). (> 16, 17)
VIERA Link related operations no longer
function properly.
Check the “VIERA Link” setting on the connected
devices.
Have you turned the VIERA Link settings off?
When the HDMI connections are changed, after a
power failure or after the AC mains lead has been
removed, VIERA Link operations may not
function properly.
jTurn on all the devices that are connected to
the TV with an HDMI cable and then turn the
TV on.
jTurn off the VIERA Link settings and turn it on
again. For details refer to the Operating
Instructions for the TV.
jWhile this unit and the TV are connected with
the HDMI cable, turn on the TV and then
remove this unit’s AC mains lead cord and
reconnect it again.
The first few seconds of audio cannot be heard
when using the HDMI connection.
This may occur during DVD-Video chapter
playback. Change the digital audio output setting
on the connected device from “Bitstream” to “PCM”.
If operations become unstable when
connected to a non-Panasonic HDMI
compatible device, connect using an optical
digital audio cable. (> 16)
Turn VIERA Link off.
1 Press and hold [MUTE] on the remote control
and [VOLUME s] on this unit for more than 2
sec.
The setting is changed when the , DTS
and PCM indicators blink.
2 After the setting has changed, turn off and
then on all the connected devices.
To reset the setting, return to the factory preset.
(> left)
When VIERA Link is turned off the ARC function
is not available. Be sure to connect the optical
digital audio cable. (> 16)
To return to the factory preset.
While this unit is on, press [Í/I] on this unit for
more than 4 sec.
(All the indicators will blink twice when the unit is
reset.)
If this unit does not operate as expected,
return the settings to the factory preset.
General operation
D
HDMI
D
SC-HTB520EGEBGNGS_RQTX1279-B.book Page 23 Tuesday, February 22, 2011 9:05 AM
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SC-HTB520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-HTB520 in the language / languages: English as an attachment in your email.

The manual is 5,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SC-HTB520

Panasonic SC-HTB520 User Manual - Dutch - 160 pages

Panasonic SC-HTB520 User Manual - Polish - 136 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info