734666

Panasonic SC-HC2020 Manual

22
Zoom out
Zoom in
Previous page
1/32
Next page
22
TQBJ2081
“BLUETOOTH INITIALIZING”
“NETWORK INITIALIZING”
• The system is carrying out an internal process.
– Wait for approximately 3 minutes.
– Do not disconnect the AC mains lead. Doing so may
cause malfunction.
“ERROR”
• An incorrect operation was done. Read the instructions and
try again.
“F ” / “F ” (“ ” represents a number.)
• There is a problem with this unit.
Disconnect the AC mains lead from the AC outlet, reconnect
it to the outlet after about 30 seconds. Wait for about 10
seconds, then switch on the unit. If the problem still persists,
disconnect the AC mains lead and consult your dealer.
“FAIL”
• Updating or setting has failed. After switching off the unit,
disconnect the AC mains lead from the AC outlet, reconnect
it to the outlet after about 30 seconds. Wait for about
10 seconds, then switch on the unit and redo the update.
• The firmware download has failed. Press any button to exit.
Try again later.
• The server cannot be found. Press any button to exit. Make
sure that the wireless network is connected to the Internet.
“ILLEGAL OPEN”
• The sliding door is not in a correct position. Switch off the
system and then switch on again.
“INVALID TO PRESET”
• You cannot preset an online music service.
“LEVEL 0”
• There is no link between this system and the wireless
router. Try the following operations:
– Check that the wireless router is switched on.
– Switch this system off and on again.
– Reset the wireless network settings. (~6)
– If the problem persists, consult your dealer.
“LINKING”
• This system is trying to connect to the last connected
Bluetooth
®
device when “BLUETOOTH” is selected.
“NO CONNECT”
• This system cannot connect to the network.
Check the network connection. (
~6)
“NO DEVICE”
• The USB device is not connected. Examine the connection.
“NO DISC”
• You have not put in a disc.
“NO PLAY”
• Examine the content. You can only play supported format.
• The files in the USB device may be corrupted. Format the
USB device and try again.
• The system may have a problem. Switch off the system and
then switch on again.
“NO PRESET”
• DAB memory presetting has not been done.
“NO SIGNAL”
• The station cannot be received. Adjust the antenna.
“NOT SUPPORTED”
• You have connected an unsupported USB device.
“PGM FULL”
• The number of programmed tracks is more than 24.
“PLAYERROR”
• An unsupported MP3 file has been played. The system will
skip that track and play the next one.
“READING”
• The unit is checking the “CD/USB” information.
After this display has disappeared, start operating.
“REMOTE 1”
“REMOTE 2”
• The remote control and this unit are using different codes.
Change the code of the remote control.
– When “REMOTE 1” is shown, press and hold [OK] and
[1] for a minimum of 4 seconds.
– When “REMOTE 2” is shown, press and hold [OK] and [2]
for a minimum of 4 seconds.
“SCAN FAILED”
• Stations cannot be received. Adjust the antenna or perform
the “AUTO SCAN” tuning function. (
~14)
If “SCAN FAILED” is still shown, find the best signal
reception with the “MANUAL SCAN” tuning function.
(
~14)
“SOUND 1 NOT SET”
“SOUND 2 NOT SET”
“SOUND 3 NOT SET”
• You have not saved the sound effects into the sound setting
number.
“USB OVER CURRENT ERROR”
• The USB device is drawing too much power. Disconnect the
USB device, switch off the system and then switch on again.
• Check the connection, it may be caused by a faulty USB
cable.
“VBR”
• The system cannot show the remaining play time for
variable bit rate (VBR) tracks.
“WAIT”
• This is shown, for example, when this unit is switching off.
• This is flashing when the system is trying to enter a network
setting mode.
SC-HC2020 EB.GN TQBJ2081 En_Rev 1-spec.fm Page 22 Wednesday, April 25, 2018 9:07 AM
offset printing rev. 1
… 22 …


Need help? Post your question in this forum.

Forumrules
1

Forum

panasonic-sc-hc2020

Reset search

  • How to connect to panasonic HC2020-3c02 via Bluetooth Submitted on 15-10-2022 at 12:17

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Panasonic SC-HC2020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Panasonic SC-HC2020 in the language / languages: English as an attachment in your email.

The manual is 4,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Panasonic SC-HC2020

Panasonic SC-HC2020 User Manual - German, Dutch, French, Italian - 120 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info